저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM for Supermicro X13SAW-TLN4F memory upgrade

SKU CH-TJK9-7E3C6

A 16 GB DDR5 5600 MHz UDIMM with CL46 latency and 1.1 V operation, validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact 16GB DDR5-5600 spec match for Supermicro X13SAW-TLN4F
  • 1Rx8 non-ECC UDIMM fits board slot and population rules
  • Major OEM Samsung, Micron or Hynix chips tested at rated speed
  • CL46 latency at 1.1V runs at full DDR5-5600 bandwidth
  • Lifetime replacement warranty with free US-based technical support

Exact-Match DDR5 Upgrade for Supermicro X13SAW-TLN4F

This NEMIX RAM module delivers 16GB of DDR5 memory rated at 5600MHz with CL46 timings. It uses a 1Rx8 non-ECC unbuffered design at 1.1V. The 288-pin UDIMM form factor matches the motherboard's requirements precisely.

Fits Single DIMM Slot Without ECC or Buffering

The module installs directly into a standard DDR5 UDIMM slot on the Supermicro X13SAW-TLN4F board. Its unbuffered, non-ECC architecture means no registered or server-class memory is needed. Major OEM chips from Samsung, Micron or Hynix provide tested stability at rated speed and voltage.

Suits Builders Needing a Verified 16GB DDR5 Module

This kit serves users upgrading or repairing the specified Supermicro platform with a single validated stick. Buyers who want more storage than 16GB provides should look elsewhere. Builders requiring ECC error correction or registered buffering must choose a different module type. Systems not based on the X13SAW-TLN4F motherboard will not guarantee compatibility.

주요 특징

  • Exact 16GB DDR5-5600 spec match for Supermicro X13SAW-TLN4F
  • 1Rx8 non-ECC UDIMM fits board slot and population rules
  • Major OEM Samsung, Micron or Hynix chips tested at rated speed
  • CL46 latency at 1.1V runs at full DDR5-5600 bandwidth
  • Lifetime replacement warranty with free US-based technical support

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 16GB DDR5 5600MHz module run at its rated CL46 latency continuously under heavy workloads?

Yes, the module is tested for stability at the rated CL46 timing, 5600MHz speed and 1.1V voltage so it maintains those settings during sustained use.

Does the 1.1V unbuffered DDR5 UDIMM generate noticeable heat or noise during all-day operation?

The module has no heat spreader and runs at the standard 1.1V DDR5 voltage; it produces no noise and relies on normal case airflow for cooling.

Must my Supermicro X13SAW-TLN4F motherboard already support DDR5 5600MHz PC5-44800 1Rx8 unbuffered memory for this kit to work?

Yes, the board must accept 288-pin DDR5 UDIMMs at 5600MHz with 1Rx8 non-ECC organisation; consult the manual for supported capacities and population order.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.