We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM for Supermicro X13SAW-TLN4F memory upgrade

SKU CH-TJK9-7E3C6

A 16 GB DDR5 5600 MHz UDIMM with CL46 latency and 1.1 V operation, validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact 16GB DDR5-5600 spec match for Supermicro X13SAW-TLN4F
  • 1Rx8 non-ECC UDIMM fits board slot and population rules
  • Major OEM Samsung, Micron or Hynix chips tested at rated speed
  • CL46 latency at 1.1V runs at full DDR5-5600 bandwidth
  • Lifetime replacement warranty with free US-based technical support

Exact-Match DDR5 Upgrade for Supermicro X13SAW-TLN4F

This NEMIX RAM module delivers 16GB of DDR5 memory rated at 5600MHz with CL46 timings. It uses a 1Rx8 non-ECC unbuffered design at 1.1V. The 288-pin UDIMM form factor matches the motherboard's requirements precisely.

Fits Single DIMM Slot Without ECC or Buffering

The module installs directly into a standard DDR5 UDIMM slot on the Supermicro X13SAW-TLN4F board. Its unbuffered, non-ECC architecture means no registered or server-class memory is needed. Major OEM chips from Samsung, Micron or Hynix provide tested stability at rated speed and voltage.

Suits Builders Needing a Verified 16GB DDR5 Module

This kit serves users upgrading or repairing the specified Supermicro platform with a single validated stick. Buyers who want more storage than 16GB provides should look elsewhere. Builders requiring ECC error correction or registered buffering must choose a different module type. Systems not based on the X13SAW-TLN4F motherboard will not guarantee compatibility.

Highlights

  • Exact 16GB DDR5-5600 spec match for Supermicro X13SAW-TLN4F
  • 1Rx8 non-ECC UDIMM fits board slot and population rules
  • Major OEM Samsung, Micron or Hynix chips tested at rated speed
  • CL46 latency at 1.1V runs at full DDR5-5600 bandwidth
  • Lifetime replacement warranty with free US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 16GB DDR5 5600MHz module run at its rated CL46 latency continuously under heavy workloads?

Yes, the module is tested for stability at the rated CL46 timing, 5600MHz speed and 1.1V voltage so it maintains those settings during sustained use.

Does the 1.1V unbuffered DDR5 UDIMM generate noticeable heat or noise during all-day operation?

The module has no heat spreader and runs at the standard 1.1V DDR5 voltage; it produces no noise and relies on normal case airflow for cooling.

Must my Supermicro X13SAW-TLN4F motherboard already support DDR5 5600MHz PC5-44800 1Rx8 unbuffered memory for this kit to work?

Yes, the board must accept 288-pin DDR5 UDIMMs at 5600MHz with 1Rx8 non-ECC organisation; consult the manual for supported capacities and population order.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.