SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501895BTC
재고 있음
NEMIX RAM
NEMIX RAM 384GB (6x64GB) DDR5-6400 ECC RDIMM CL52 1.1V 2Rx4 memory upgrade for Supermicro H13SRH
A 384 GB DDR5-6400 ECC registered server memory kit built with six 64 GB 2Rx4 modules at 1.1 V and CL52 latency, validated for the Supermicro H13SRH motherboard
- Capacity384GB (6 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from six 64 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H13SRH
- ECC and registered design correct single-bit errors and offload the memory controller
- 1 V operation matches the board's voltage requirement for stable full-population use
- 288-pin RDIMM form factor fits the exact slot type the motherboard expects
Exact-Match DDR5-6400 RDIMM Kit
This 384GB kit contains six 64GB DDR5-6400 ECC Registered DIMMs built to the exact rank, voltage and timing the Supermicro H13SRH memory controller expects. It is intended for administrators who must populate every slot at full capacity without compatibility guesswork.
DDR5 RDIMM Population Limits
DDR5 Registered DIMMs allow full-slot population because the register buffers the command bus, yet the motherboard still defines maximum capacity per slot and approved population order. The manual must be consulted before installation to confirm supported configurations.
Upgrade From Partial or Lower-Capacity Kits
Replacing a partially filled set or smaller RDIMMs with this 6x64GB kit raises total memory to 384GB at the board's rated 6400MT/s speed. The jump is worth it when workloads need the full capacity ceiling and ECC protection at native voltage.
주요 특징
- 384 GB total capacity from six 64 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H13SRH
- ECC and registered design correct single-bit errors and offload the memory controller
- 1 V operation matches the board's voltage requirement for stable full-population use
- 288-pin RDIMM form factor fits the exact slot type the motherboard expects
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K6 |
| Capacity | 384GB (6 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 6X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Should I pick the 384GB kit or a smaller capacity for my Supermicro H13SRH?
The 384GB kit (6 × 64GB) fills all six channels on the H13SRH, delivering maximum bandwidth and capacity; choose a smaller kit only if your workload does not need the full 384GB or if your CPU SKU limits total memory.
What does DDR5-6400 CL52 mean once the modules are installed in the server?
The memory controller will run the DIMMs at 6400 MT/s with a CAS latency of 52 cycles, giving a peak transfer rate of PC5-51200 while the registered buffer keeps every slot stable at full population.
Does the 288-pin RDIMM interface limit speed or capacity on the H13SRH?
The 288-pin registered DDR5 form factor is exactly what the H13SRH requires; it supports the full 6400 MT/s data rate and 64GB per module without down-clocking when all six slots are populated.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
