SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501548BTC
재고 있음
NEMIX RAM
NEMIX RAM 512GB (4x128GB) DDR5 4800 CL40 1.1V 4Rx4 ECC RDIMM memory upgrade
A 512 GB registered DDR5 kit of four 128 GB ECC modules running at 4800 MT/s with CL40 latency for compatible Supermicro servers
- Capacity512GB (4 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 512GB total capacity with four 128GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- CL40 latency at 1.1V operating voltage
- ECC registered RDIMM for error-correcting server reliability
- 288-pin 4Rx4 design validated for Supermicro X13SEM systems
512 GB DDR5 ECC RDIMM kit
This NEMIX RAM kit provides 512 GB of DDR5 memory across four 128 GB modules. Each module runs at 4800 MT/s with CL40 latency at 1.10 V. The 288-pin registered DIMMs include on-die ECC and a 4Rx4 organisation for data integrity in demanding workloads.
For Supermicro X13SEM platforms
The kit is validated for Supermicro SYS-211E-FRN2T, SYS-211E-FRDN2T, X13SEM-F and X13SEM-TF systems. Builders using other motherboards or consumer chipsets should verify qualified vendor lists before purchasing, as registered ECC DIMMs will not function in unbuffered slots.
Registered 4Rx4 ECC at 1.10 V
The combination of registered signalling, 4Rx4 density and on-die ECC at 1.10 V determines compatibility. Only systems that explicitly support DDR5 RDIMMs with this rank structure and voltage will POST and operate correctly with this kit.
주요 특징
- 512GB total capacity with four 128GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- CL40 latency at 1.1V operating voltage
- ECC registered RDIMM for error-correcting server reliability
- 288-pin 4Rx4 design validated for Supermicro X13SEM systems
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K4 |
| Capacity | 512GB (4 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (4X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
이 상품에 대한 질문
Will the 288-pin DDR5 RDIMM modules fit the DIMM slots on a SuperMicro SYS-211E-FRN2T server?
Yes, the kit is built as a 288-pin DDR5 RDIMM package specifically for SuperMicro SYS-211E-FRN2T, SYS-211E-FRDN2T, X13SEM-F and X13SEM-TF platforms.
What is the correct sequence for populating the four 128 GB modules on a dual-processor SuperMicro board?
Install one module per channel following the motherboard manual slot order — typically CPU0 channel A then B, then CPU1 channel A then B — and seat each RDIMM until the ejectors click.
How long do the Samsung, Micron or Hynix DRAM chips on these registered ECC RDIMMs last under continuous server workloads?
The major OEM DRAM chips are rated for continuous operation; ECC corrects single-bit errors and the registered buffer reduces electrical load, so modules typically run for the server's service life without replacement.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
