SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501112BTC
재고 있음
NEMIX RAM
NEMIX RAM 8GB DDR4 2133 CL15 1Rx4 ECC RDIMM memory upgrade
An 8 GB DDR4 2133 ECC registered DIMM with CL15 latency for compatible Hynix servers and workstations
- Capacity8GB
- SpeedDDR4 2133 (PC4 17000)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection safeguards data integrity
- Registered design stabilises heavy server workloads
- 2 V operation reduces power draw
- CL15 latency at 2133 MHz speeds response
- 8 GB single module simplifies capacity upgrades
8 GB DDR4-2133 ECC RDIMM module
This 8 GB registered DIMM runs at DDR4 2133 (PC4-17000) with CL15 latency and 1.2 V operation. It uses a single-rank 1Rx4 organisation and includes ECC for data-integrity protection in server workloads. The module is built with major-OEM chips and validated against Hynix HMA41GR7 part numbers.
Registered DIMM constraint
Registered memory requires a motherboard that supports buffered modules; standard desktop boards will not initialise this stick. The DDR4-2133 interface caps bandwidth at the PC4-17000 rate, so faster CPUs or chipsets cannot push this module beyond its rated speed. Mixing registered and unbuffered DIMMs on the same channel is not supported by any platform.
Verify RDIMM support and slot count
Confirm the target system lists RDIMM compatibility and accepts 288-pin DDR4 modules before purchase. Check the maximum per-slot capacity and total memory limit in the vendor manual, as some platforms restrict registered DIMM populations. Ensure the operating voltage is 1.2 V and that no BIOS revision blocks third-party registered memory.
주요 특징
- ECC protection safeguards data integrity
- Registered design stabilises heavy server workloads
- 2 V operation reduces power draw
- CL15 latency at 2133 MHz speeds response
- 8 GB single module simplifies capacity upgrades
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 2133MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR17000-814K1 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Should I choose the 8 GB module or add a second stick for dual-channel?
This listing is a single 8 GB DDR4 2133 CL15 1Rx4 registered ECC RDIMM; add a second identical module if your server board supports dual-channel population.
What does the 2133 MT/s rating deliver in a live server?
The module runs at DDR4 2133 (PC4-17000) with CL15 latency at 1.20 V, providing registered ECC bandwidth for stable server workloads.
Will the 288-pin RDIMM fit my Hynix-compatible motherboard?
Yes, the 288-pin DDR4 registered DIMM is built to match Hynix HMA41GR7AFR4N-TF, HMA41GR7BJR4N-TF and HMA41GR7MFR4N-TF modules.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
