SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502629BTC
재고 있음
NEMIX RAM
NEMIX RAM 8GB DDR4 2133MHz CL15 288-Pin VLP ECC RDIMM 1Rx4 memory upgrade
An 8 GB DDR4-2133 registered ECC RDIMM with CL15 latency and 1.2 V operation for compatible Hynix servers
- Capacity8GB
- SpeedDDR4 2133 (PC4 17000)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in servers
- Registered signal buffering improves system stability
- 2V operation reduces power consumption
- VLP design fits compact server chassis
- CL15 latency delivers responsive performance
8GB DDR4 ECC RDIMM for Hynix Servers
This registered DDR4 module delivers 8 GB of ECC-protected memory at 2133 MT/s with CL15 latency. It operates at 1.2 V and uses a 1Rx4 organisation on a 288-pin VLP form factor. The stick is built for Hynix server and workstation platforms that require registered error-correcting memory.
Replaces non-ECC or slower registered DIMMs
Upgrading from standard unbuffered memory adds hardware error correction for data integrity in mission-critical workloads. Moving from a lower-speed registered module to this PC4-17000 part increases bandwidth while keeping the same registered signal loading. The jump is worth it when your platform demands registered ECC and you need the 2133 MT/s speed grade.
Verify registered ECC support and slot type
Confirm your motherboard accepts 288-pin DDR4 registered DIMMs and enables ECC in the BIOS. The module is not compatible with systems that only support unbuffered UDIMMs or 204-pin SODIMM slots. Check the qualified vendor list for the exact part number MR17000-814K1 before ordering.
주요 특징
- ECC protection prevents data corruption in servers
- Registered signal buffering improves system stability
- 2V operation reduces power consumption
- VLP design fits compact server chassis
- CL15 latency delivers responsive performance
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 2133MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR17000-814K1 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Will this 288-pin VLP RDIMM fit in a standard-height server slot?
The very-low-profile design fits standard 288-pin DDR4 RDIMM sockets; verify chassis clearance for the shorter module height.
What is the correct way to seat this registered ECC module so the system recognises the full 8 GB?
Align the notch, press firmly until both retaining clips click, then confirm 2133 MT/s and ECC active in BIOS.
When should this 1.2 V DDR4 RDIMM be replaced?
Replace the module if the server logs uncorrectable ECC errors or recurring corrected errors that persist after reseating.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
