SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502603BTC
재고 있음
NEMIX RAM
NEMIX RAM 8GB DDR4 2400 ECC RDIMM 1Rx4 CL17 Dell PowerEdge FC430
8GB DDR4 2400 ECC registered RDIMM, CL17 1.2V, for Dell PowerEdge FC430 servers
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection guards data integrity in Dell PowerEdge FC430
- Registered DDR4 2400 MHz CL17 meets server timing specs
- 2 V operation lowers power draw per module
- 1Rx4 single-rank layout simplifies memory population
- 288-pin RDIMM form factor fits Dell server slots
Dell PowerEdge FC430 8GB DDR4 ECC RDIMM
This 8GB DDR4 2400 ECC registered DIMM is built for the Dell PowerEdge FC430 server. It targets administrators who need validated, single-rank memory to maintain platform stability under continuous workloads. The module uses major-brand DRAM and runs at 1.2V with CL17 timing.
Upgrade from non-ECC or slower DDR4 in the FC430
Replacing unbuffered or lower-speed modules with this registered ECC kit adds error correction and the 2400 MT/s data rate the FC430 memory controller expects. The jump is worth it when the server shows corrected-error counts or when firmware requires registered DIMMs for full channel population.
Tool-less DIMM slot insertion on the FC430
Installation follows the standard 288-pin RDIMM procedure: open the ejectors, align the notch, press until the latches click. The usual issue is mixing 1Rx4 ranks with different rank configurations in the same channel, which the FC430 BIOS may reject at POST.
주요 특징
- ECC protection guards data integrity in Dell PowerEdge FC430
- Registered DDR4 2400 MHz CL17 meets server timing specs
- 2 V operation lowers power draw per module
- 1Rx4 single-rank layout simplifies memory population
- 288-pin RDIMM form factor fits Dell server slots
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR19200-814K1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2400MHZ PC4-19200 1Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Does this 288-pin DDR4 RDIMM fit the Dell PowerEdge FC430 memory slots?
Yes, the 288-pin DDR4 RDIMM form factor matches the FC430 memory slots. The module is built for Dell servers and uses the registered ECC design the platform requires.
What is the correct way to seat this registered ECC module, and what step do people often miss?
Align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, and verify the 1Rx4 rank is recognised in the BIOS.
Will the Samsung, Micron or Hynix chips on this 8 GB module need replacement under normal server load?
The major-OEM chips are stress-tested under load and rated for continuous server operation. No scheduled replacement is expected for the life of the system.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
