SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00495769BTC
재고 있음
NEMIX RAM
NEMIX RAM CSE-GS7A-000NBP3 16GB DDR5 4800 CL40 ECC RDIMM memory upgrade
Adds 16 GB of DDR5-4800 ECC registered memory with CL40 latency at 1.1 V for compatible Supermicro workstations
- Capacity16GB
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- ECC protection guards data integrity in critical workloads
- 4800 MT/s DDR5 bandwidth accelerates server throughput
- Registered design stabilises signal on dense motherboards
- 10 V operation lowers platform power draw
- Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility
Compatible DDR5 ECC RDIMM
This 16GB DDR5 4800 module is built for the SuperMicro SuperWorkstation SYS-751A-I and X13DAI-T platforms. It delivers registered ECC memory for workloads that demand data integrity and server-grade stability. The single-rank 1Rx8 design operates at 1.1V with CL40 latency.
Registered DDR5 for server boards
The 288-pin RDIMM format fits motherboards that require registered memory and will not accept unbuffered DIMMs. ECC circuitry corrects single-bit errors to protect critical data. No heat spreader is included, so airflow in the chassis must be adequate for sustained loads.
Upgrade from lower-capacity DDR5 RDIMMs
Adding this module increases total memory without mixing speeds or ranks. It suits users who need more capacity for virtualization or large datasets but do not require higher frequencies. Builders needing unbuffered memory or non-ECC modules should look elsewhere.
주요 특징
- ECC protection guards data integrity in critical workloads
- 4800 MT/s DDR5 bandwidth accelerates server throughput
- Registered design stabilises signal on dense motherboards
- 10 V operation lowers platform power draw
- Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K1 |
| Capacity | 16GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
What sustained-use limit appears first with this 1.10 V DDR5 4800 ECC RDIMM?
The module runs at 1.10 V with CL40 timings; under continuous load the first limit is the memory controller's thermal throttle point, not the DIMM itself, since there is no heat spreader.
How much heat and noise does this registered 1Rx8 module add when the server runs all day?
It draws 1.10 V at DDR5 4800 with no onboard fan or spreader, so heat is dissipated passively into the chassis airflow and it adds no audible noise of its own.
What must the system already provide for this 288-pin RDIMM to work?
A Supermicro motherboard with DDR5 RDIMM slots that support ECC registered memory at 4800 MT/s and 1.10 V operation.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
