We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board DDR5 memory module with black chips, no heat spreader, 288 pins

NEMIX RAM

NEMIX RAM CSE-GS7A-000NBP3 16GB DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-T4MA-C4A75 MPN CSE-GS7A-000NBP3

Adds 16 GB of DDR5-4800 ECC registered memory with CL40 latency at 1.1 V for compatible Supermicro workstations

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection guards data integrity in critical workloads
  • 4800 MT/s DDR5 bandwidth accelerates server throughput
  • Registered design stabilises signal on dense motherboards
  • 10 V operation lowers platform power draw
  • Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility

Compatible DDR5 ECC RDIMM

This 16GB DDR5 4800 module is built for the SuperMicro SuperWorkstation SYS-751A-I and X13DAI-T platforms. It delivers registered ECC memory for workloads that demand data integrity and server-grade stability. The single-rank 1Rx8 design operates at 1.1V with CL40 latency.

Registered DDR5 for server boards

The 288-pin RDIMM format fits motherboards that require registered memory and will not accept unbuffered DIMMs. ECC circuitry corrects single-bit errors to protect critical data. No heat spreader is included, so airflow in the chassis must be adequate for sustained loads.

Upgrade from lower-capacity DDR5 RDIMMs

Adding this module increases total memory without mixing speeds or ranks. It suits users who need more capacity for virtualization or large datasets but do not require higher frequencies. Builders needing unbuffered memory or non-ECC modules should look elsewhere.

Highlights

  • ECC protection guards data integrity in critical workloads
  • 4800 MT/s DDR5 bandwidth accelerates server throughput
  • Registered design stabilises signal on dense motherboards
  • 10 V operation lowers platform power draw
  • Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What sustained-use limit appears first with this 1.10 V DDR5 4800 ECC RDIMM?

The module runs at 1.10 V with CL40 timings; under continuous load the first limit is the memory controller's thermal throttle point, not the DIMM itself, since there is no heat spreader.

How much heat and noise does this registered 1Rx8 module add when the server runs all day?

It draws 1.10 V at DDR5 4800 with no onboard fan or spreader, so heat is dissipated passively into the chassis airflow and it adds no audible noise of its own.

What must the system already provide for this 288-pin RDIMM to work?

A Supermicro motherboard with DDR5 RDIMM slots that support ECC registered memory at 4800 MT/s and 1.10 V operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.