저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two green DDR5 RDIMM sticks, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 128GB 2x64GB CL46 2Rx4 ECC RDIMM memory upgrade

SKU CH-DCTV-DD7F5

128 GB DDR5 5600 ECC registered DIMM kit built for the Supermicro X14SDV-42C-SP3F motherboard

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

  • 128 GB total capacity from two 64 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro X14SDV-42C-SP3F
  • Registered ECC design corrects single-bit errors and offloads the memory controller under full load
  • 1 V operation at 2Rx4 rank matches the board's voltage and population rules exactly
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target motherboard

Server-grade DDR5 upgrade

This 128GB kit contains two 64GB DDR5 RDIMMs rated at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. It targets administrators upgrading the Supermicro X14SDV-42C-SP3F motherboard where registered ECC memory is required. The modules use major OEM Samsung, Micron, or Hynix chips in a 2Rx4 configuration.

Registered ECC 288-pin form factor

Registered buffering reduces electrical load on the memory controller so all slots can be populated at full capacity. ECC detects and corrects single-bit errors to prevent silent data corruption in production workloads. The 288-pin RDIMM keying ensures mechanical compatibility only with boards that support registered DDR5.

Low-voltage DDR5 thermals

Operating at 1.1V helps limit power draw and heat output compared with higher-voltage DDR5 variants. No heat spreaders are fitted so airflow across the bare PCB is the primary cooling path. Verify your chassis provides adequate DIMM-slot airflow for sustained server operation.

주요 특징

  • 128 GB total capacity from two 64 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro X14SDV-42C-SP3F
  • Registered ECC design corrects single-bit errors and offloads the memory controller under full load
  • 1 V operation at 2Rx4 rank matches the board's voltage and population rules exactly
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target motherboard

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What speed does the DDR5 5600 interface run at on this kit?

The modules operate at DDR5 5600 (PC5-44800) with a CAS latency of CL46 and 1.1V, so the memory controller sees the rated 5600 MT/s transfer rate when the board supports it.

Which physical slot and form factor do the 64 GB modules need?

They are 288-pin DDR5 RDIMMs, the registered form factor required by the Supermicro X14SDV-42C-SP3F motherboard; UDIMM or SODIMM modules will not fit.

What is the correct population order when installing both 64 GB sticks?

Consult the Supermicro X14SDV-42C-SP3F manual for the approved DIMM population sequence; the board's memory-population rules dictate which slots must be filled first for full 128 GB recognition.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.