NZXT CM-H72FW-R1 PC Case White Mid-Tower
- E-ATX (Up to 27.7mm…
- White
NZXT
Mid-tower ATX case with high-airflow mesh panels, bottom fan mounts for direct GPU cooling, and a pre-installed 120 mm F360 RGB Core fan unit
Options H7 Flow RGB Black (2024)
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
The H7 Flow RGB (2024) is an ATX mid-tower built from SGCC steel with a dark-tinted tempered-glass side panel. It accepts E-ATX, ATX, Micro-ATX and Mini-ITX motherboards and comes with a front-mounted F360 RGB Core single-frame fan unit running at up to 1700 RPM. The chassis targets builders who want a conventional layout with a narrow desk footprint.
Ultra-fine perforated panels serve as high-performance mesh dust filters across the front, top and bottom. Front I/O provides two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C port and a headset audio jack. Internally there are two plus two 3.5-inch drive bays, four 2.5-inch bays and seven expansion slots for add-in cards.
Liquid-cooling support allows up to a 420 mm radiator at the front, 360 mm at the top and 140 mm at the rear. The case clears graphics cards up to 410 mm long, CPU coolers up to 185 mm tall and power supplies up to 200 mm deep. Overall dimensions are 19.49 x 8.46 x 17.91 inches.
| Motherboard Compatibility | E-ATX (Up to 27.7mm), ATX, Micro-ATX, Mini-ITX |
|---|---|
| Color | Black |
| Case Material | SGCC Steel, Dark Tinted Tempered Glass |
| Type | ATX Mid Tower |
| Side Panel | 1 x Side Tempered Glass Panel |
| Dust Filters | High Performance Mesh |
| Front Ports | 2 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2 Type-C, 1 x Audio, |
| Brand | NZXT |
| Model | CM-H72FB-R1 |
| Part Number | CM-H72FB-R1 |
| Internal 3.5" Drive Bays | 2 + 2 |
| Internal 2.5" Drive Bays | 4 |
| Expansion Slots | 7 |
| Fan Options | Front: 3 x 120 mm / 3 x 140 mm (1 x F360 RGB Core included) Top: 3 x 120 mm / 2 x 140 mm Bottom: 3 x 120 mm Rear: 1 x 120 mm / 1 x 140 mm Fan Specs F360 RGB Core Fan (Case Version) Speed: 1,700 ± 200 RPM Airflow: 50.1 CFM Static Pressure: 1.27 mm-H2O Noise: 23.3 dBA Fan Connector: 3-pin |
| Pre-installed Fans | Front - 3 x 120mm |
| Radiator Options | Front: Up to 420 mm Top: Up to 360 mm Rear: Up to 140 mm |
| Max GPU Length | 410 mm |
| Max CPU Cooler Height | 185 mm |
| Max PSU Length | 200 mm |
| Dimensions | 19.49" x 8.46" x 17.91" |
| Features | The H7 Flow stays true to a traditional mid-tower design while adding bottom fan support for direct GPU cooling due to the vertically-oriented PSU. This keeps the footprint narrow and takes up less desk space, unlike dual-chamber cases. Ultra-fine perforated panels are optimized for airflow, and it's equipped with a front-mounted F360 RGB Core single-frame fan unit for out-of-the-box cooling and lighting. |
| 배송 무게 | 14.42 kg |
| 포장 크기 | 632 × 566 × 328 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The front panel includes one USB 3.2 Gen 2 Type-C port running at up to 10 Gbps, plus two USB 3.2 Gen 1 Type-A ports at 5 Gbps.
Supports E-ATX up to 27.7 mm, ATX, Micro-ATX and Mini-ITX. Maximum CPU cooler height is 185 mm and maximum graphics card length is 410 mm.
The three-fan single frame mounts in the front with four screws. Connect its PWM lead to a motherboard fan header and its RGB lead to a 5 V ARGB header or the included controller; forgetting the ARGB cable leaves lighting inactive.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?