Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
A 40 mm square cooling fan with Mgalev bearing, 12 V 1.6 W power and three-wire connection
The OEM Industries KD1204PKVX is a 40 mm square fan built with Mgalev bearing technology. It runs on 12 V and draws 1.6 W through a standard three-wire connection. The unit is sold new and contains no LED lighting. It suits builders who need a low-profile airflow component for tight spaces.
Installation consists of aligning the 40 mm square frame with the matching cut-out and securing it with four screws. The three-wire lead plugs directly into a 12 V fan header; no adapter or PWM configuration is required. The only common issue is forgetting to route the short cable clear of adjacent heatsink fins before tightening the last screw.
At 1.6 W the fan delivers enough static pressure for 40 mm tower coolers or chipset heatsinks in industrial and embedded systems. It cannot sustain the airflow demanded by larger desktop CPU coolers or multi-GPU enclosures. Buyers needing higher CFM for overclocked processors should look at larger frame sizes.
| Model | KD1204PKVX |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| Bearing Type | Mgalev |
| LED | No |
Verify the fan spins when 12 V power is applied and listen for smooth rotation from the Mgalev bearing.
The package contains the 40 mm square fan with three-wire lead; mounting screws and any required adapter cables are not included.
Only the 12 V 1.6 W 4020 model with Mgalev bearing is offered, so select this single variant.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
No language matches that.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?