OEM Industries
OEM Industries MC25101V1-0000-A99 CPU cooler 25 mm 12 V 0.69 W 2-pin
A 25 mm ball-bearing fan with a 2-pin connector and orange LED for 12 V CPU cooling
- ColorBlack
- TypeFan only
- Fan Size25mm
- Bearing TypeBall
- Power Connector2 Pin
- LEDOrange
- Compact 25 mm frame fits tight builds
- Ball bearing runs smoothly at 12 V
- Low 0.69 W draw keeps system cool
- Orange LED adds subtle visual cue
- Two-pin connector enables simple installation
Compact 25 mm Fan for Tight Builds
This OEM Industries cooler is a 25 mm square fan designed for CPU air-cooling in space-constrained systems. It runs on 12 V DC power and draws 0.69 W through a two-pin connector. The ball bearing and orange LED give basic visual feedback.
Replaces Larger or Noisier 2510 Units
Swapping an existing 2510 frame fan with this model fits the same 25 by 25 by 10 mm footprint while keeping the two-wire power interface. The jump is worthwhile when the current fan has failed, developed bearing noise or lacks the orange LED status light.
Check Clearance and Header Type Before Ordering
Verify that the mounting holes match the 25 mm square pattern and that the motherboard or controller provides a two-pin 12 V header. Builders needing PWM speed control, a three- or four-pin connector or a taller heatsink stack should look elsewhere.
주요 특징
- Compact 25 mm frame fits tight builds
- Ball bearing runs smoothly at 12 V
- Low 0.69 W draw keeps system cool
- Orange LED adds subtle visual cue
- Two-pin connector enables simple installation
사양
| Model | MC25101V1-0000-A99 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 25mm |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| LED | Orange |
이 상품에 대한 질문
Will the 25 mm square frame with 2-pin connector fit my board's CPU fan header?
The cooler measures 25 by 25 by 10 mm and uses a 2-pin connector running at 12 V, so it fits headers spaced for that footprint and voltage.
What is the common mistake when plugging the 2-pin connector onto a 4-pin motherboard header?
Align the two pins with the outer ground and 12 V pins on the 4-pin header; reversing them leaves the fan dead because the sense and control pins stay empty.
How long does the ball-bearing fan rated at 0.69 W typically run before needing replacement?
Ball bearings in a 12 V 0.69 W fan of this size commonly last several years of continuous operation before noise or speed drop signals a swap.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Thermal Grizzly TG-MP8-120-20-30-1R Minus Pad 8 chipset cooling 120x20x3.0mm
DOCTOR METAL 3x 120mm case fan pack white with controller
- Case Fan
- Case
DOCTOR METAL 120 mm case fan 3-pack with controller
- Case Fan
- Case



