我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

OEM Industries

OEM Industries MC25101V1-0000-A99 CPU cooler 25 mm 12 V 0.69 W 2-pin

SKU CH-84H2-EH2GP MPN MC25101V1-0000-A99

A 25 mm ball-bearing fan with a 2-pin connector and orange LED for 12 V CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size25mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDOrange
  • Compact 25 mm frame fits tight builds
  • Ball bearing runs smoothly at 12 V
  • Low 0.69 W draw keeps system cool
  • Orange LED adds subtle visual cue
  • Two-pin connector enables simple installation

Compact 25 mm Fan for Tight Builds

This OEM Industries cooler is a 25 mm square fan designed for CPU air-cooling in space-constrained systems. It runs on 12 V DC power and draws 0.69 W through a two-pin connector. The ball bearing and orange LED give basic visual feedback.

Replaces Larger or Noisier 2510 Units

Swapping an existing 2510 frame fan with this model fits the same 25 by 25 by 10 mm footprint while keeping the two-wire power interface. The jump is worthwhile when the current fan has failed, developed bearing noise or lacks the orange LED status light.

Check Clearance and Header Type Before Ordering

Verify that the mounting holes match the 25 mm square pattern and that the motherboard or controller provides a two-pin 12 V header. Builders needing PWM speed control, a three- or four-pin connector or a taller heatsink stack should look elsewhere.

商品特色

  • Compact 25 mm frame fits tight builds
  • Ball bearing runs smoothly at 12 V
  • Low 0.69 W draw keeps system cool
  • Orange LED adds subtle visual cue
  • Two-pin connector enables simple installation

商品規格

ModelMC25101V1-0000-A99
ColorBlack
TypeFan only
Fan Size25mm
Bearing TypeBall
Power Connector2 Pin
LEDOrange

商品問答

Will the 25 mm square frame with 2-pin connector fit my board's CPU fan header?

The cooler measures 25 by 25 by 10 mm and uses a 2-pin connector running at 12 V, so it fits headers spaced for that footprint and voltage.

What is the common mistake when plugging the 2-pin connector onto a 4-pin motherboard header?

Align the two pins with the outer ground and 12 V pins on the 4-pin header; reversing them leaves the fan dead because the sense and control pins stay empty.

How long does the ball-bearing fan rated at 0.69 W typically run before needing replacement?

Ball bearings in a 12 V 0.69 W fan of this size commonly last several years of continuous operation before noise or speed drop signals a swap.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。