저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two green 240-pin DDR3 ECC registered DIMMs with gold contacts

OWC

OWC 16GB (2x8GB) DDR3 1333 ECC Registered RDIMM Dell Precision R5500 memory upgrade

SKU CH-SANK-57ZX3

A 16 GB DDR3-1333 ECC registered DIMM kit validated for the Dell Precision R5500 workstation

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design prevents data corruption in servers
  • 16 GB dual-channel kit boosts multitasking headroom
  • Dell Precision R5500 validated for plug-and-play install
  • DDR3 1333 CL9 at 1.5 V matches system spec
  • Replaces twelve Dell OEM part numbers for easy sourcing

Dell Precision R5500 ECC upgrade

This kit provides 16 GB of DDR3 ECC registered memory in two 8 GB modules for the Dell Precision R5500 workstation. It is intended for servers and workstations that require error-correcting registered DIMMs and cannot accept standard unbuffered desktop memory.

Thermals noise and power draw

The modules operate at 1.5 V with a CL9 latency at 1333 MHz, matching the system's original specification. No heat spreaders are fitted, so airflow in the chassis determines operating temperature and the memory adds no audible noise.

Build quality and connectors

Each module uses a 240-pin 2Rx4 registered DIMM form factor that installs directly into the R5500 memory slots. The kit replaces a long list of Dell part numbers, confirming mechanical and electrical compatibility, but it will not work in systems that require unbuffered or non-ECC memory.

주요 특징

  • ECC registered design prevents data corruption in servers
  • 16 GB dual-channel kit boosts multitasking headroom
  • Dell Precision R5500 validated for plug-and-play install
  • DDR3 1333 CL9 at 1.5 V matches system spec
  • Replaces twelve Dell OEM part numbers for easy sourcing

사양

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell Precision R5500

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I install the 240-pin DDR3 RDIMM modules in the Dell Precision R5500, and what step is commonly missed?

Power down the R5500, open the chassis, locate the DDR3 DIMM slots, align the notch on each 240-pin module with the slot key, press firmly until the retention clips lock, then verify in BIOS that both 8 GB modules are detected at 1333 MHz.

What maintenance or replacement will the ECC registered RDIMM kit need over time?

The modules have no heat spreader and no moving parts, so no routine maintenance is required; replacement is only necessary if a module fails or if the workstation is upgraded to a platform that does not support DDR3 ECC registered memory.

What limit appears first when the Dell Precision R5500 runs sustained workloads with this 16 GB DDR3 1333 CL9 kit?

The memory bandwidth ceiling of the DDR3 1333 interface is reached before capacity becomes a bottleneck, so sustained throughput tops out at the PC3-10600 data rate.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.