저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

OWC

OWC 16GB (4x4GB) DDR3 1600 CL11 ECC UDIMM desktop RAM

SKU CH-A7PF-PNC8V

16GB kit of four DDR3 1600 CL11 ECC UDIMM modules at 1.5V for desktop, workstation or server use

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16 GB total capacity across four 4 GB modules
  • ECC unbuffered design detects and corrects single-bit errors
  • DDR3 1600 speed with CL11 latency for responsive multitasking
  • 5 V JEDEC-standard voltage ensures broad workstation and server compatibility
  • 240-pin UDIMM form factor fits select desktop, workstation and NAS systems

16GB DDR3 ECC Kit for Workstations

This kit provides 16GB of DDR3 1600 memory across four 4GB unbuffered UDIMM modules. It operates at CL11 latency with a standard 1.5V supply and includes ECC error correction. The 240-pin DIMMs are designed for desktop workstations, servers and NAS systems that require data integrity.

Upgrade from Non-ECC or Lower Capacity

Replacing standard non-ECC modules with this kit adds single-bit error correction and multi-bit detection for critical workloads. The jump is worth it when the platform supports ECC unbuffered memory and the application demands protection against silent data corruption. Four modules populate dual-channel boards fully for maximum bandwidth.

Steady Operation Under Continuous Load

JEDEC-standard timings and 1.5V operation keep power draw predictable during extended compute tasks. Without a heat spreader, airflow across the bare PCB manages thermals in typical server chassis. The modules maintain rated 1600 speed through sustained multi-threaded workloads such as virtualization hosting or file-system checksumming.

주요 특징

  • 16 GB total capacity across four 4 GB modules
  • ECC unbuffered design detects and corrects single-bit errors
  • DDR3 1600 speed with CL11 latency for responsive multitasking
  • 5 V JEDEC-standard voltage ensures broad workstation and server compatibility
  • 240-pin UDIMM form factor fits select desktop, workstation and NAS systems

사양

BrandOWC
Part Number1E6D31R8016S
Capacity16GB (4 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 240-pin DDR3 DIMMs fit my motherboard slots?

These modules use the standard 240-pin DDR3 UDIMM form factor, so they fit any desktop, workstation or server board that accepts DDR3 memory.

What is the correct way to seat the four 4 GB sticks, and what step do people often miss?

Open the retention clips, align the notch on each module with the slot key, press straight down until both clips snap shut, then verify the BIOS shows all 16 GB at 1600 MHz.

Do the ECC UDIMMs need any firmware updates or periodic replacement?

No firmware is required; the JEDEC-compliant DDR3 modules run at 1.5 V with CL11 timing and are rated for the life of the system under normal workloads.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.