저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

OWC

OWC 1R6T32R4064S 64GB DDR3L 1600 CL11 ECC Registered RDIMM 4x16GB SuperServer 2027 2028 4027

SKU CH-GT91-JHFRW

64GB kit of four 16GB DDR3L 1600 CL11 ECC registered RDIMMs for Supermicro SuperServer 2027, 2028 and 4027 series

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • ECC registered design protects data integrity in server workloads
  • 64GB kit with four 16GB modules maximises SuperServer capacity
  • DDR3L 1600 CL11 at 1.35V reduces power draw versus standard DDR3
  • 240-pin RDIMM form factor fits Supermicro 2027, 2028 and 4027 series
  • 2Rx4 dual-rank organisation enables higher density per channel

Server-specific DDR3L kit

This 64 GB kit contains four 16 GB DDR3L ECC registered RDIMMs rated at 1600 MHz with CL11 latency. It is built for Supermicro SuperServer 2027PR, 2027R, 2027TR, 2028UT and 4027GR platforms that require registered memory. The modules operate at 1.35 V and use a 240-pin form factor with 2Rx4 organisation. Standard desktop boards cannot use this memory.

Registered DDR3L constraints

Registered DIMMs add a clock-cycle delay that desktop chipsets do not expect, so they will not post in consumer motherboards. The kit cannot be mixed with unbuffered modules and requires a platform that explicitly supports ECC registered DDR3L at 1.35 V. Maximum capacity and population rules are set by the server documentation, not by the modules themselves.

Pre-installation checklist

Confirm the target SuperServer model appears in the supported list above and that the BIOS is current enough for 16 GB registered DIMMs. Verify the memory slots accept 240-pin DDR3L and that the system voltage rail is 1.35 V. Check the server manual for slot-filling order and maximum rank count per channel before ordering.

주요 특징

  • ECC registered design protects data integrity in server workloads
  • 64GB kit with four 16GB modules maximises SuperServer capacity
  • DDR3L 1600 CL11 at 1.35V reduces power draw versus standard DDR3
  • 240-pin RDIMM form factor fits Supermicro 2027, 2028 and 4027 series
  • 2Rx4 dual-rank organisation enables higher density per channel

사양

BrandOWC
Part Number1R6T32R4064S
Capacity64GB (4 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 2027PR Series
Supermicro SuperServer 2027R Series
Supermicro SuperServer 2027TR Series
Supermicro SuperServer 2028UT Series
Supermicro SuperServer 4027GR Series

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I pick the 4x16 GB kit or a different capacity for my Supermicro SuperServer 2027PR?

The kit contains four 16 GB modules for a total of 64 GB and is validated for Supermicro SuperServer 2027PR, 2027R, 2027TR, 2028UT and 4027GR series.

What does the 1600 MHz speed mean once the modules are installed in the server?

The modules run at DDR3L 1600 (PC3L-12800) with CL11 latency at 1.35 V, delivering the rated bandwidth when the server memory controller operates at that frequency.

How does the 240-pin DDR3L ECC registered interface limit what I can do with this memory?

The 240-pin DDR3L registered DIMMs require a server or workstation platform that supports ECC registered memory; they will not work in standard desktop boards or alongside unbuffered DIMMs.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.