OWC 32GB (2x16GB) DDR3L 1600 CL11 ECC Registered RDIMM
- 32GB (2 x 16GB)
- 240-Pin DDR3L ECC R…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
64GB kit of four 16GB DDR3L 1600 CL11 ECC registered RDIMMs for Supermicro SuperServer 2027, 2028 and 4027 series
Capacity 64GB (4 x 16GB)
This 64 GB kit contains four 16 GB DDR3L ECC registered RDIMMs rated at 1600 MHz with CL11 latency. It is built for Supermicro SuperServer 2027PR, 2027R, 2027TR, 2028UT and 4027GR platforms that require registered memory. The modules operate at 1.35 V and use a 240-pin form factor with 2Rx4 organisation. Standard desktop boards cannot use this memory.
Registered DIMMs add a clock-cycle delay that desktop chipsets do not expect, so they will not post in consumer motherboards. The kit cannot be mixed with unbuffered modules and requires a platform that explicitly supports ECC registered DDR3L at 1.35 V. Maximum capacity and population rules are set by the server documentation, not by the modules themselves.
Confirm the target SuperServer model appears in the supported list above and that the BIOS is current enough for 16 GB registered DIMMs. Verify the memory slots accept 240-pin DDR3L and that the system voltage rail is 1.35 V. Check the server manual for slot-filling order and maximum rank count per channel before ordering.
| Brand | OWC |
|---|---|
| Part Number | 1R6T32R4064S |
| Capacity | 64GB (4 x 16GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperServer 2027PR Series Supermicro SuperServer 2027R Series Supermicro SuperServer 2027TR Series Supermicro SuperServer 2028UT Series Supermicro SuperServer 4027GR Series |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit contains four 16 GB modules for a total of 64 GB and is validated for Supermicro SuperServer 2027PR, 2027R, 2027TR, 2028UT and 4027GR series.
The modules run at DDR3L 1600 (PC3L-12800) with CL11 latency at 1.35 V, delivering the rated bandwidth when the server memory controller operates at that frequency.
The 240-pin DDR3L registered DIMMs require a server or workstation platform that supports ECC registered memory; they will not work in standard desktop boards or alongside unbuffered DIMMs.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?