저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two green DDR4 RDIMM modules with gold contacts, no heat spreaders

OWC

OWC 32GB (2x16GB) DDR4 2666 ECC Registered RDIMM FS6400 HD6500 server RAM

SKU CH-BSCD-ZEXYP

32 GB dual-channel DDR4 ECC registered RDIMM kit running at 2666 MHz CL19 for Synology FS6400 and HD6500 servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 32GB (2 x 16GB)

Rank 2Rx4

  • ECC registered design prevents data corruption in servers
  • 32GB dual-channel kit with two 16GB modules
  • DDR4 2666MHz CL19 speed with 1.2V operation
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Compatible with Synology FS6400 and HD6500 NAS systems

Server ECC Registered Memory Upgrade

This kit provides 32GB of DDR4 ECC Registered memory in two 16GB modules. It is built for servers, workstations and NAS systems that require registered DIMMs. The modules run at 2666MHz with CL19 latency at 1.2V. They will not work in standard desktop computers or alongside unbuffered or load-reduced memory.

Registered DIMM Platform Constraints

The 288-pin registered design only fits platforms that support ECC Registered DDR4. Mixing with unbuffered or load-reduced modules is not supported. The memory operates at 2666MHz and is backward compatible with 2133MHz and 2400MHz systems. Buyers who need unbuffered ECC or non-ECC memory for consumer boards cannot use this kit.

Two-Module Installation Notes

Installation follows standard DIMM slot procedures for the target server or NAS. The dual-channel kit should populate matching channel slots for best performance. Common issues include inserting modules into unsupported slot populations or mixing with incompatible memory types. The lack of heat spreaders means airflow across the modules is important in dense chassis.

주요 특징

  • ECC registered design prevents data corruption in servers
  • 32GB dual-channel kit with two 16GB modules
  • DDR4 2666MHz CL19 speed with 1.2V operation
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Compatible with Synology FS6400 and HD6500 NAS systems

사양

BrandOWC
Part Number2R6D42R4032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I choose the 32 GB dual-channel kit or buy single 16 GB modules for my Synology FS6400?

The 32 GB kit provides two matched 16 GB modules (2R6D42R4032P) that run together in dual-channel mode, giving the full bandwidth the FS6400 expects. Single modules would work but lose the paired-channel benefit.

What does the PC4-21300 2666 MHz rating actually deliver inside a FS6400 or HD6500?

The modules operate at 2666 MT/s with CL19 latency at 1.2 V, providing the peak transfer rate the Synology D4RD-2666-16G and D4ER01-16G slots are designed for. The system will clock them at 2666 MHz unless the platform forces a lower speed.

How does the ECC registered DDR4 interface limit what I can install alongside these DIMMs?

These are 288-pin ECC registered DDR4 RDIMMs (2Rx4). They must not be mixed with unbuffered or load-reduced ECC modules, and the memory controller will only accept registered ECC DIMMs in the same channel.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.