저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

OWC

OWC 32GB (2x16GB) DDR4 2666 ECC UDIMM memory upgrade

SKU CH-QQDE-7YVDJ

32 GB kit of two 16 GB DDR4 2666 ECC UDIMM modules for Synology RS2821RP+ NAS

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • 8GB
  • 16GB (2 x 8GB)
  • 32GB (2 x 16GB)

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • 32 GB dual-channel kit boosts NAS responsiveness
  • ECC protection guards data integrity in Synology RS2821RP+
  • JEDEC-standard DDR4 2666 CL19 runs at 1.2 V for efficiency
  • Unbuffered 2Rx8 288-pin DIMMs install without tools
  • Backward compatible with 2133 MHz and 2400 MHz systems

Capacity and Fit

This 32 GB kit contains two 16 GB DDR4 ECC UDIMM modules built for the Synology RackStation RS2821RP+. Each stick runs at 2666 MHz with CL19 latency at 1.2 V and uses a 2Rx8 rank layout. The unbuffered design matches the NAS memory slots without requiring registered DIMM support.

Sustained Operation

ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption during long compute or storage workloads. The JEDEC-standard timings and 1.2 V operation keep power draw steady, so the modules maintain rated speed inside a densely populated chassis without thermal throttling. No heat spreaders are fitted, relying on system airflow for cooling.

Platform Limits

The kit is validated for the RS2821RP+ and will down-clock automatically to 2133 MHz or 2400 MHz if the memory controller demands it. Systems that require registered or load-reduced DIMMs cannot use these unbuffered modules. Builders needing more than 32 GB must populate additional slots with identical specification memory.

주요 특징

  • 32 GB dual-channel kit boosts NAS responsiveness
  • ECC protection guards data integrity in Synology RS2821RP+
  • JEDEC-standard DDR4 2666 CL19 runs at 1.2 V for efficiency
  • Unbuffered 2Rx8 288-pin DIMMs install without tools
  • Backward compatible with 2133 MHz and 2400 MHz systems

사양

BrandOWC
Part Number2E6D42R8032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSynology RackstationRS2821RP+

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much power does the 1.2V DDR4 kit draw when the NAS runs continuously?

The modules operate at 1.2V, the standard DDR4 voltage, so power draw stays low even under 24/7 NAS workloads.

Does the Synology RS2821RP+ need any extra hardware or firmware before I install these 288-pin ECC UDIMMs?

No extra hardware is required; the kit is designed as a direct drop-in upgrade for the RS2821RP+ memory slots.

Will the 2666MHz CL19 modules run stably alongside any existing 2133MHz or 2400MHz sticks I keep in the system?

Yes, the kit is backward compatible with 2133MHz and 2400MHz speeds and will down-clock automatically to match slower modules.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.