저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
UV orange G1/4 90 degree rotary elbow fitting 15mm extension 37.7mm tall

PrimoChill

PrimoChill G1/4 90° Rotary 15mm Elbow Fitting UV Orange

SKU CH-JNR8-8H63Z

A G1/4 rotary elbow fitting with a 15 mm extension and 360° swivel for angled liquid-cooling runs

  • TypeFittings
  • Rotates 360° for flexible tubing routing
  • 90° elbow redirects flow around tight spaces
  • 15mm extension clears nearby components
  • Brass body with UV orange powder coat
  • G1/4 threads fit standard water-cooling loops

Loop redirection fitting

The PrimoChill G1/4 90° rotary elbow fitting lets custom-loop builders change tubing direction by ninety degrees while rotating three hundred and sixty degrees for precise alignment. Its fifteen millimetre extension adds clearance around tight components. The UV orange powder-coated brass body suits themed builds.

Upgrade from fixed elbows

This fitting replaces rigid ninety degree adapters that cannot swivel after installation. The rotary joint is worth it when tubing runs must avoid motherboard heatsinks, GPU backplates or reservoir ports that sit at awkward angles. Fixed elbows force compromise on tube routing; this adapter removes that constraint.

Build integration

The male to female G1/4 threads connect directly to standard water-blocks, radiators or pump tops without extra adapters. Installed base height is fifteen millimetres and total height is thirty seven point seven millimetres, leaving room for adjacent fittings. Thread depth is five millimetres. The rotary seal frees the builder from pre-planning exact rotational orientation during loop assembly.

주요 특징

  • Rotates 360° for flexible tubing routing
  • 90° elbow redirects flow around tight spaces
  • 15mm extension clears nearby components
  • Brass body with UV orange powder coat
  • G1/4 threads fit standard water-cooling loops

사양

TypeFittings

이 상품에 대한 질문

What clearance does the 15 mm extension add for the G1/4 90° rotary elbow?

The 15 mm installed base height provides extra clearance so tubing can clear nearby components while the 360° rotary lets you aim the outlet in any direction.

How is the G1/4 rotary elbow installed and what step is often missed?

Screw the male G1/4 thread 5 mm deep into the port, then rotate the female end to the desired angle before tightening; skipping the alignment step can stress the tubing run.

When should the UV orange SX powder-coated fitting be inspected or replaced?

Inspect the brass threads and O-ring seal during each loop maintenance; replace if the powder coat shows cracking, the threads gall, or any coolant weep appears at the 37.7 mm body.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.