SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501548BTC
재고 있음
RIMLANCE
RIMLANCE 8GB DDR3 1866MHz CL13 1.35V UDIMM 2RX8 Desktop Memory
An 8 GB DDR3 module running at 1866 MHz with CL13 latency and 1.35 V low voltage
- Capacity8GB
- SpeedDDR3 1866 (PC3 14900)
- CAS LatencyCL13
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor Brand Chipset
- 8GB single module adds capacity for multitasking
- 1866MHz PC3-14900 speed delivers fast data throughput
- CL13 latency supports responsive system operation
- 35V low voltage reduces power draw and heat
- Unbuffered non-ECC 2Rx8 design fits standard desktop boards
RIMLANCE 8GB DDR3 1866MHz UDIMM
This is a single 8GB unbuffered DDR3 desktop memory module rated at 1866MHz with a CAS latency of CL13. It operates at a low 1.35V and uses a 2Rx8 chip configuration built from major-brand DRAM components.
Suits DDR3 systems needing an 8GB stick
Builders upgrading a compatible DDR3 platform that accepts 1.35V unbuffered non-ECC UDIMMs can use this module to add capacity. Systems that require registered or ECC memory, or platforms limited to lower DDR3 data rates, cannot use this part.
The deciding spec is the DDR3 1866MHz PC3-14900
Your motherboard and CPU memory controller must support this exact data rate and the 1.35V operating voltage for the module to run as specified. Without that match the stick will not function at its rated speed or may not post at all.
주요 특징
- 8GB single module adds capacity for multitasking
- 1866MHz PC3-14900 speed delivers fast data throughput
- CL13 latency supports responsive system operation
- 35V low voltage reduces power draw and heat
- Unbuffered non-ECC 2Rx8 design fits standard desktop boards
사양
| Brand | RIMLANCE |
|---|---|
| Model | RUD14900LD8C8 |
| Capacity | 8GB |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
이 상품에 대한 질문
Does the 1.35 V DDR3 UDIMM fit a standard 240-pin desktop DIMM slot?
Yes, the module is a standard 240-pin DDR3 UDIMM that installs in any desktop DIMM slot keyed for DDR3 memory.
What is the correct way to seat the 8 GB DDR3 1866 MHz module and what step do people often miss?
Align the notch with the slot key, press down firmly until both side clips snap shut, then verify the system reports 1866 MHz at CL13 in BIOS.
When should the 2Rx8 DDR3 1866 MHz stick be replaced or checked for errors?
Run a memory diagnostic if you see random crashes or corrupted files; replace the stick if errors persist after reseating and testing in another slot.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
