We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

RIMLANCE

RIMLANCE 8GB DDR3 1866MHz CL13 1.35V UDIMM 2RX8 Desktop Memory

SKU CH-8PQ2-S0TDE

An 8 GB DDR3 module running at 1866 MHz with CL13 latency and 1.35 V low voltage

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor Brand Chipset
  • 8GB single module adds capacity for multitasking
  • 1866MHz PC3-14900 speed delivers fast data throughput
  • CL13 latency supports responsive system operation
  • 35V low voltage reduces power draw and heat
  • Unbuffered non-ECC 2Rx8 design fits standard desktop boards

RIMLANCE 8GB DDR3 1866MHz UDIMM

This is a single 8GB unbuffered DDR3 desktop memory module rated at 1866MHz with a CAS latency of CL13. It operates at a low 1.35V and uses a 2Rx8 chip configuration built from major-brand DRAM components.

Suits DDR3 systems needing an 8GB stick

Builders upgrading a compatible DDR3 platform that accepts 1.35V unbuffered non-ECC UDIMMs can use this module to add capacity. Systems that require registered or ECC memory, or platforms limited to lower DDR3 data rates, cannot use this part.

The deciding spec is the DDR3 1866MHz PC3-14900

Your motherboard and CPU memory controller must support this exact data rate and the 1.35V operating voltage for the module to run as specified. Without that match the stick will not function at its rated speed or may not post at all.

Highlights

  • 8GB single module adds capacity for multitasking
  • 1866MHz PC3-14900 speed delivers fast data throughput
  • CL13 latency supports responsive system operation
  • 35V low voltage reduces power draw and heat
  • Unbuffered non-ECC 2Rx8 design fits standard desktop boards

Specifications

BrandRIMLANCE
ModelRUD14900LD8C8
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset

Questions about this item

Does the 1.35 V DDR3 UDIMM fit a standard 240-pin desktop DIMM slot?

Yes, the module is a standard 240-pin DDR3 UDIMM that installs in any desktop DIMM slot keyed for DDR3 memory.

What is the correct way to seat the 8 GB DDR3 1866 MHz module and what step do people often miss?

Align the notch with the slot key, press down firmly until both side clips snap shut, then verify the system reports 1866 MHz at CL13 in BIOS.

When should the 2Rx8 DDR3 1866 MHz stick be replaced or checked for errors?

Run a memory diagnostic if you see random crashes or corrupted files; replace the stick if errors persist after reseating and testing in another slot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.