SAMA S50 White Mid Tower PC Case
- White
- ABS / SPCC / Temper…
SAMA
Mid-tower ATX case with dual-chamber layout, 47 mm cable routing space, four pre-installed 120 mm ARGB PWM fans, top-mounted 360 mm radiator support.
Option S50 Black
The SAMA S50 Black is a mid-tower chassis designed for ATX, Micro-ATX and ITX motherboards, including back-connect layouts. Its dual-chamber structure separates the power supply and cabling from the main component area, providing a 47mm routing space behind the motherboard tray. Seven expansion slots and room for up to eleven 120mm fans give builders flexibility for high-performance hardware.
The case carries PPLP.info A+ certification for its high-density metal mesh on the front and top panels, engineered to maximise intake and exhaust efficiency. Four ARGB PWM fans are pre-installed — three at the front and one at the rear — and connect to a built-in hub for synchronised speed and lighting control. Top mounts accept radiators up to 360mm, while the front and bottom each support three 120mm fans for extensive cooling configurations.
The single specification that determines compatibility is the maximum graphics card length of 410mm. Builders planning to install longer triple-slot cards must verify their model fits within this limit. The chassis also accommodates CPU coolers up to 165mm tall and ATX power supplies up to 180mm deep, but the GPU length is the critical constraint for most high-end builds.
| Brand | SAMA |
|---|---|
| Model | S50 Black |
| Color | Black |
| Case Material | ABS / SPCC / Tempered Glass |
| Motherboard Compatibility | ATX / ITX / Micro ATX |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 3 |
| Expansion Slots | 7 |
| Fan Options | Bottom - 3 x 120mm / Front - 3 x 120mm / Rear - 1 x 120mm / Side - 1 x 120mm / Top - 3 x 120mm |
| Pre-installed Fans | Front - 3 x 120mm / Rear - 1 x 120mm |
| Radiator Options | Top - Up to 120mm / Top - Up to 140mm / Top - Up to 240mm / Top - Up to 280mm / Top - Up to 360mm |
| Max GPU Length | 410 mm |
| Max CPU Cooler Height | 165 mm |
| Dimensions | 18.70 x 9.25 x 16.77 |
| Weight | 7.3kg |
| 배송 무게 | 8.57 kg |
| 포장 크기 | 521 × 483 × 292 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The case comes with three front and one rear 120mm ARGB PWM fans already mounted. Connect each fan's PWM and ARGB cables to the included hub, then run the hub's leads to a motherboard 5V ARGB header and a PWM fan header for synchronised control.
The front and top high-density metal mesh panels act as intake filters. Remove them periodically and clean with compressed air or a soft brush to maintain the PPLP.info A+ certified airflow. The four pre-installed 120mm fans can be wiped down during the same routine.
The top panel supports radiators up to 360mm. Under continuous heavy load the limiting factor becomes the case's ability to exhaust that heat through the top mesh, so monitor coolant temperatures to ensure the 360mm radiator remains effective.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?