SanDisk Optimus GX PRO 8100 1TB M.2 2280 PCIe 5.0 x4 NVMe 2.0 internal SSD SDSP82100TAN-000E0
- Internal Solid Stat…
- M.2 2280-S3-M
SanDisk
2TB PCIe 5.0 NVMe 2.0 M.2 2280 drive with 3D NAND TLC, 14900 MB/s read, 14000 MB/s write, 2.3M/2.4M IOPS and 1200 TBW endurance
Option 2TB
The SanDisk Optimus GX PRO 8100 is a 2TB M.2 2280 internal SSD that uses PCIe 5.0 x4 and NVMe 2.0. It targets professionals, creators, and gamers who need fast access to large libraries and demanding AI workloads. 3D NAND TLC flash provides the capacity and endurance for sustained write-heavy tasks.
The drive fits a standard M.2 2280-S3-M slot and requires no extra mounting hardware. Because this model ships without a heatsink, the motherboard must provide adequate airflow or a built-in shield to keep temperatures in check. Ensure the BIOS supports PCIe 5.0 and NVMe 2.0 before installation to avoid link-speed fallback.
Sequential reads reach 14900 MBps and writes reach 14000 MBps, while random performance hits 2.3M read and 2.4M write IOPS. The 1200 TBW endurance rating and 1750000 hour MTBF indicate the drive is built for long-term heavy workloads. Active power averages 6.4W on reads and 7.0W on writes, and nCache 4.0 technology helps maintain consistent throughput during extended sessions.
| Brand | SanDisk |
|---|---|
| Series | Optimus GX PRO 8100 |
| Model | SDSP82200TAN-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280-S3-M |
| Capacity | 2TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 5.0 x4 |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 14900 MBps |
| Max Sequential Write | Up to 14000 MBps |
| 4KB Random Read | Up to 2,300,000 IOPS |
| 4KB Random Write | Up to 2,400,000 IOPS |
| Terabytes Written (TBW) | 1200TB |
| MTBF | 1,750,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | Average Active Power Read: 6.4W Average Active Power Write: 7.0W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 2.38mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 7.5g |
| 배송 무게 | 0.05 kg |
| 포장 크기 | 127 × 102 × 1 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Run a PCIe 5.0 compatible benchmark such as CrystalDiskMark on a motherboard with a PCIe 5.0 x4 M.2 slot; the results should approach the rated 14900 MBps read and 14000 MBps write for this 2TB model
The package contains the bare M.2 2280-S3-M SSD without a heatsink; you must provide a motherboard with a PCIe 5.0 x4 M.2 slot and any desired cooling solution
The 2TB model delivers 1200 TBW endurance and up to 2300000 random read / 2400000 random write IOPS; higher capacities offer greater TBW but this is the only 2TB variant listed
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?