SanDisk SDSP82200TAH-000E0 Optimus GX PRO 8100 2TB internal SSD
- Internal Solid Stat…
- M.2 2280-S3-M
SanDisk
M.2 2280 8 TB internal SSD with PCIe 5.0 x4 interface, sequential read up to 14900 MB/s, write up to 13200 MB/s, 4800 TBW endurance and integrated heatsink
Option 8TB w/ Heatsink
The SanDisk Optimus GX PRO 8100 is an 8TB internal solid state drive built for professionals who need high-capacity, high-speed storage. It uses a PCIe 5.0 x4 interface with NVMe protocol and 3D NAND TLC memory. A low-profile anodised aluminium heatsink with RGB LED is integrated for thermal management.
This drive suits content creators, AI developers and enthusiasts handling massive project libraries and write-intensive workloads. The 4800 TBW endurance rating supports heavy sustained writing. Users with older motherboards lacking PCIe 5.0 x4 slots or those needing only modest capacity for general office work should consider lower-specification alternatives.
Under continuous heavy workloads the integrated heatsink helps maintain performance during intense workflows. Average active power draw is 7.1W for reads and 7.3W for writes while idle consumption is 5 mW. The drive operates between 0°C and 85°C with an MTBF of 1,750,000 hours.
| Brand | SanDisk |
|---|---|
| Series | Optimus GX PRO 8100 |
| Model | SDSP82800TAH-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280-D5-M |
| Capacity | 8TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 5.0 x4 |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 14900 MBps |
| Max Sequential Write | Up to 13200 MBps |
| 4KB Random Read | Up to 2,200,000 IOPS |
| 4KB Random Write | Up to 2,400,000 IOPS |
| Terabytes Written (TBW) | 4800TB |
| MTBF | 1,750,000 hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | Average Active Power Read: 7.1W Average Active Power Write: 7.3W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 11.25mm |
| Width | 25mm |
| Depth | 80mm |
| Weight | 30.4g |
| 배송 무게 | 0.05 kg |
| 포장 크기 | 127 × 102 × 1 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Yes, the drive uses an M.2 2280-D5-M form factor and requires a PCIe 5.0 x4 NVMe 2.0 slot to reach its rated 14,900 MBps read and 13,200 MBps write speeds.
The anodized aluminum heatsink adds 11.25 mm of height above the PCB, so clearance depends on your specific motherboard layout and graphics card backplate thickness.
Run a 4 KB random read test at queue depth 32 using a tool such as CrystalDiskMark or FIO and compare the result to the 2,200,000 IOPS specification.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?