SanDisk Optimus GX PRO 850X 2TB internal SSD SDSP81200TAN-000E0
- Internal Solid Stat…
- M.2 2280-S3-M
SanDisk
High-capacity 4TB M.2 2280-D5-M NVMe drive with integrated heatsink, PCIe 4.0 x4 interface, up to 7300 MBps read, 6600 MBps write, and 2400 TBW endurance
Capacity 4TB w/ Heatsink
This SanDisk Optimus GX PRO 850X is a 4TB internal SSD built on the M.2 2280-D5-M form factor with a PCI-Express 4.0 x4 interface and NVMe 1.4 protocol. It uses 3D NAND TLC memory to deliver sequential reads up to 7300 MBps and writes up to 6600 MBps. The drive suits content creators and power users who need high-capacity, high-speed storage for demanding workloads.
Verify that your motherboard provides an M.2 slot keyed for M modules and wired for PCI-Express 4.0 x4 to reach the rated speeds. The drive measures 80mm long, 24mm wide and 10.31mm tall including its integrated heatsink, so confirm the slot has enough vertical clearance and that no motherboard heatsink or large component will interfere. A 2280-length standoff is required.
The bundled heatsink keeps the controller within the 0°C to 85°C operating range without any moving parts, so the drive runs silently. Idle power draw is 5 mW, while typical active consumption reaches 8.0W during reads and 7.2W during writes. The 2400TB TBW rating and 1,750,000-hour MTBF indicate sustained reliability under heavy daily use.
| Brand | SanDisk |
|---|---|
| Series | Optimus GX PRO 850X |
| Model | SDSP81400TAH-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280-D5-M |
| Capacity | 4TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 7300 MBps |
| Max Sequential Write | Up to 6600 MBps |
| 4KB Random Read | Up to 1,200,000 IOPS |
| 4KB Random Write | Up to 1,100,000 IOPS |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,750,000 hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | Average Active Power Read: 8.0W Average Active Power Write: 7.2W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 10.31mm |
| Width | 24mm |
| Depth | 80mm |
| Weight | 30.4g |
| 배송 무게 | 0.05 kg |
| 포장 크기 | 127 × 102 × 1 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The drive measures 10.31mm high, 24mm wide and 80mm deep; verify your board’s M.2 slot clearance and standoff position before installing.
The integrated heatsink adds to the 10.31mm total height; ensure at least a few millimetres of space above the slot and some airflow for sustained write loads.
Idle draw is 5 mW; active read peaks at 8.0W and active write at 7.2W, so a standard 12V rail with ample margin covers it easily.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?