SanDisk Optimus GX PRO 850X 2TB internal SSD SDSP81200TAN-000E0
- Internal Solid Stat…
- M.2 2280-S3-M
SanDisk
High-capacity 4TB M.2 2280-D5-M NVMe drive with integrated heatsink, PCIe 4.0 x4 interface, up to 7300 MBps read, 6600 MBps write, and 2400 TBW endurance
Capacity 4TB w/ Heatsink
This SanDisk Optimus GX PRO 850X is a 4TB internal SSD built on the M.2 2280-D5-M form factor with a PCI-Express 4.0 x4 interface and NVMe 1.4 protocol. It uses 3D NAND TLC memory to deliver sequential reads up to 7300 MBps and writes up to 6600 MBps. The drive suits content creators and power users who need high-capacity, high-speed storage for demanding workloads.
Verify that your motherboard provides an M.2 slot keyed for M modules and wired for PCI-Express 4.0 x4 to reach the rated speeds. The drive measures 80mm long, 24mm wide and 10.31mm tall including its integrated heatsink, so confirm the slot has enough vertical clearance and that no motherboard heatsink or large component will interfere. A 2280-length standoff is required.
The bundled heatsink keeps the controller within the 0°C to 85°C operating range without any moving parts, so the drive runs silently. Idle power draw is 5 mW, while typical active consumption reaches 8.0W during reads and 7.2W during writes. The 2400TB TBW rating and 1,750,000-hour MTBF indicate sustained reliability under heavy daily use.
| Brand | SanDisk |
|---|---|
| Series | Optimus GX PRO 850X |
| Model | SDSP81400TAH-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280-D5-M |
| Capacity | 4TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 7300 MBps |
| Max Sequential Write | Up to 6600 MBps |
| 4KB Random Read | Up to 1,200,000 IOPS |
| 4KB Random Write | Up to 1,100,000 IOPS |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,750,000 hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | Average Active Power Read: 8.0W Average Active Power Write: 7.2W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 10.31mm |
| Width | 24mm |
| Depth | 80mm |
| Weight | 30.4g |
| 出貨重量 | 0.05 kg |
| 包裝尺寸 | 127 × 102 × 1 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The drive measures 10.31mm high, 24mm wide and 80mm deep; verify your board’s M.2 slot clearance and standoff position before installing.
The integrated heatsink adds to the 10.31mm total height; ensure at least a few millimetres of space above the slot and some airflow for sustained write loads.
Idle draw is 5 mW; active read peaks at 8.0W and active write at 7.2W, so a standard 12V rail with ample margin covers it easily.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?