我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

SanDisk

SanDisk Optimus GX PRO 850X 1TB M.2 2280-D5-M internal SSD SDSP81100TAH-000E0

SKU CH-K48A-M2ZKD MPN SDSP81100TAH-000E0

A 1TB internal SSD with PCI-Express 4.0 x4 interface, NVMe 1.4 protocol, 3D NAND TLC memory and a built-in heatsink delivers up to 7300 MBps sequential read and 6300 MBps sequential write speeds

  • Device TypeInternal Solid State Drive (SSD)
  • Form FactorM.2 2280-D5-M
  • Capacity1TB
  • Memory Components3D NAND TLC
  • InterfacePCI-Express 4.0 x4
  • ProtocolNVMe 1.4

Capacity 1TB w/ Heatsink

  • Sequential read speed up to 7300 MBps via PCIe 4.0 x4
  • Sequential write speed up to 6300 MBps for fast file transfers
  • Random write up to 1,100,000 IOPS for responsive multitasking
  • 600 TBW endurance with 1,750,000 hours MTBF reliability
  • Integrated heatsink maintains performance under sustained workloads

SanDisk Optimus GX PRO 850X 1TB NVMe SSD

The SanDisk Optimus GX PRO 850X is a 1TB internal solid state drive using the M.2 2280-D5-M form factor. It connects via a PCI-Express 4.0 x4 interface and uses 3D NAND TLC memory with an SLC cache design instead of a DRAM buffer. A heatsink is integrated onto the drive.

Suits builds needing PCIe 4.0 speeds

This drive suits desktops and laptops with an M.2 slot wired for PCIe 4.0 x4 that can accommodate the 8.9mm module height. Systems limited to PCIe 3.0 or slots restricted to single-sided modules should look at other options.

PCI-Express 4.0 x4 interface determines

The drive requires a motherboard or laptop M.2 key-M slot that supports PCI-Express 4.0 x4 electrical operation to reach the stated 7300 MBps read and 6300 MBps write peaks. Without that link width the drive will negotiate a slower speed.

商品特色

  • Sequential read speed up to 7300 MBps via PCIe 4.0 x4
  • Sequential write speed up to 6300 MBps for fast file transfers
  • Random write up to 1,100,000 IOPS for responsive multitasking
  • 600 TBW endurance with 1,750,000 hours MTBF reliability
  • Integrated heatsink maintains performance under sustained workloads

商品規格

BrandSanDisk
SeriesOptimus GX PRO 850X
ModelSDSP81100TAH-000E0
Device TypeInternal Solid State Drive (SSD)
Form FactorM.2 2280-D5-M
Capacity1TB
Memory Components3D NAND TLC
InterfacePCI-Express 4.0 x4
ProtocolNVMe 1.4
CacheNo DRAM (SLC)
Max Sequential ReadUp to 7300 MBps
Max Sequential WriteUp to 6300 MBps
4KB Random ReadUp to 800,000 IOPS
4KB Random WriteUp to 1,100,000 IOPS
Terabytes Written (TBW)600TB
MTBF1,750,000 hours
HeatSinkwith HeatSink
Power Consumption (Idle)5 mW
Power Consumption (Active)Average Active Power Read: 7.2W
Average Active Power Write: 6.2W
Operating Temperature0°C ~ +85°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1,500G @ 0.5 ms half-sine
Max Vibration ResistanceOperating Vibration: 5 gRMS, 10-2000 Hz, 3 axes
Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes
Height8.9mm
Width23mm
Depth80mm
Weight24g
出貨重量0.05 kg
包裝尺寸127 × 102 × 1 mm

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 8.9mm height of the M.2 2280-D5-M Optimus GX PRO 850X fit my laptop slot?

The drive measures 8.9mm tall including its integrated heatsink, so it fits standard M.2 2280 slots that allow double-sided modules with a heatsink.

What is the installation step people skip with the PCIe 4.0 x4 NVMe 1.4 drive?

After seating the module and securing the screw, many forget to enable the PCIe 4.0 x4 link in BIOS so the drive runs at NVMe 1.4 speeds instead of falling back to an older generation.

When should I plan to replace the 1TB 3D NAND TLC drive based on its 600TB endurance rating?

The 600TB written endurance and 1,750,000-hour MTBF indicate a long service life; monitor the SMART percentage-used attribute and replace the drive once it approaches 100% or if reallocated sectors begin to rise.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。