SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502088BTC
재고 있음
Sapphire Tech
Sapphire Tech NITRO+ Radeon RX 9070 XT 16GB 11348-01-20G graphics card
Refurbished Radeon RX 9070 XT with 16GB GDDR6, boost clock up to 3060 MHz, triple-fan cooler and PCI Express 5.0 x16 interface
- InterfacePCI Express 5.0 x16
- Chipset ManufacturerAMD
- GPU SeriesAMD Radeon RX 9000 Series
- GPURadeon RX 9070 XT
- ArchitectureRDNA 4
- Game ClockUp to 2520 MHz
- 16 GB GDDR6 memory for high-resolution textures
- Boost clock up to 3060 MHz for responsive frame rates
- PCI Express 5.0 x16 interface for maximum bandwidth
- Triple-fan cooler on a 331 mm ATX card for sustained thermals
- Four display outputs including two DisplayPort 2.1a for multi-monitor setups
Sapphire NITRO+ Radeon RX 9070 XT 16GB
The Sapphire NITRO+ Radeon RX 9070 XT is a refurbished graphics card built on the RDNA 4 architecture. It carries 4096 stream processors and 16GB of GDDR6 memory across a 256-bit interface. The card targets gamers and creators who need high frame rates at 1440p or entry 4K. It fits ATX cases with a 331 mm length and 3.2-slot width.
Upgrade path from older GPUs
Moving to this card from an RDNA 2 or earlier GPU brings PCI Express 5.0 x16 bandwidth and a 20 Gbps memory subsystem. The jump is worth it when your current card cannot sustain 60 fps in modern titles at native resolution. A 304W TDP and 850W recommended PSU mean you must verify power headroom before installing.
16GB GDDR6 capacity and headroom
The 16GB frame buffer handles large texture packs, heavy mod lists and 4K gaming without paging to system RAM. At 7680 x 4320 output the memory can become the limiting factor in the most demanding scenes. Triple fans keep the 3060 MHz boost clock stable under sustained loads. VR ready support covers current headsets.
주요 특징
- 16 GB GDDR6 memory for high-resolution textures
- Boost clock up to 3060 MHz for responsive frame rates
- PCI Express 5.0 x16 interface for maximum bandwidth
- Triple-fan cooler on a 331 mm ATX card for sustained thermals
- Four display outputs including two DisplayPort 2.1a for multi-monitor setups
사양
| Brand | SAPPHIRE |
|---|---|
| Series | NITRO+ |
| Model | 11348-01-20G |
| Part Number | 11348-01-20G |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | AMD |
| GPU Series | AMD Radeon RX 9000 Series |
| GPU | Radeon RX 9070 XT |
| Architecture | RDNA 4 |
| Game Clock | Up to 2520 MHz |
| Boost Clock | Up to 3060 MHz |
| Stream Processors | 4096 |
| Effective Memory Clock | 20000 MHz (20 Gbps) |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI |
| DisplayPort | 2 x DisplayPort 2.1a |
| Color | Gray |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Thermal Design Power | 304W |
| Recommended PSU Wattage | 850W |
| Power Connector | 1 x 12V-2x6-pin |
| HDCP Ready | Yes |
| Form Factor | ATX |
| Max GPU Length | 331 mm |
| Card Dimensions (L x H) | 331 x 129 x 66 mm |
| Slot Width | 3.2 Slots |
| 배송 무게 | 2.63 kg |
| 포장 크기 | 432 × 241 × 89 mm |
이 상품에 대한 질문
What case clearance and PSU capacity does the 331 mm, 3.2-slot card with a 304 W TDP require?
The card measures 331 mm long and occupies 3.2 slots, so your case must accept at least that length and thickness; the manufacturer recommends an 850 W power supply for the 304 W board.
How do I connect the single 12V-2x6 power plug and avoid the common mistake of using an older adapter?
Plug the native 12V-2x6 connector directly into a compliant PSU cable; do not use a 12VHPWR or dual 8-pin adapter, as they are not rated for this interface.
When should I plan to replace the thermal paste on the triple-fan cooler?
Re-paste the GPU die and memory pads every two to three years, or sooner if temperatures rise noticeably under load.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
