SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00505109BTC
재고 있음
Shenzhen Lianrui Information Technology
Shenzhen Lianrui Information Technology LRNV45N1 M.2 to U.2 NVMe SSD Adapter Card
Connects M.2 NVMe SSDs in 2230, 2242, 2260, 2280 and 22110mm sizes to a U.2 SFF-8639 port using an SFF-8643 cable
- TypePCI Express Controller Card
- Internal Ports1 M.2 M Key + 1 SFF-8639 Connector
- StandardM.2 to U.2 NVMe SSD Adapter Card
- Data Transfer Rate6.0 Gbps
- Operating Systems SupportedWindows 98SE/ME/2000/XP/Vista
- Dimensions0.32" x 0.21" x0.17"
- Connect M.2 NVMe SSDs via U.2 port
- Supports 2230, 2242, 2260, 2280, 22110 M-key drives
- PCIe 3.0 Gen3 X4 option for fast data rates
- Double-sided module assembly fits 1.5 mm height limit
- Works with Windows 7 through 10 and Linux Kernel 3.16
M.2 to U.2 NVMe adapter card
The Linkreal LRNV45N1 connects an M.2 M-key NVMe SSD to a U.2 (SFF-8639) or SFF-8643 host port. It accepts 2230, 2242, 2260, 2280 and 22110 mm modules up to 1.5 mm component height. The board uses a PCIe 3.0 x4 link and works with PCIe 2.0 or 1.0 systems.
Builders adding NVMe storage via U.2
Suits integrators who have a free U.2 SFF-8639 or SFF-8643 connector and want to install standard M.2 NVMe drives. Not for users lacking a U.2 or SFF-8643 port, or those needing to connect B-key or B/M-key modules. OS support covers Windows 7 through 10 and Linux kernel 3.16.
M-key NVMe requirement
Only M-key NVMe SSDs function with this adapter; B-key or B/M-key drives will not work. Maximum on-board component height is 1.5 mm and double-sided modules are supported. A free U.2 SFF-8639 or SFF-8643 port is required for installation.
주요 특징
- Connect M.2 NVMe SSDs via U.2 port
- Supports 2230, 2242, 2260, 2280, 22110 M-key drives
- PCIe 3.0 Gen3 X4 option for fast data rates
- Double-sided module assembly fits 1.5 mm height limit
- Works with Windows 7 through 10 and Linux Kernel 3.16
사양
| Brand | Linkreal |
|---|---|
| Series | M.2 to U.2 NVMe SSD Adapter Card |
| Model | 2 Ports |
| Type | PCI Express Controller Card |
| Internal Ports | 1 M.2 M Key + 1 SFF-8639 Connector |
| Standard | M.2 to U.2 NVMe SSD Adapter Card |
| Data Transfer Rate | 6.0 Gbps |
| Operating Systems Supported | Windows 98SE/ME/2000/XP/Vista |
| Dimensions | 0.32" x 0.21" x0.17" |
| Weight | 0.20 |
| Option | M.2 NVMe to PCI-e 3.0 Gen3 X4 |
이 상품에 대한 질문
Will the M.2 NVMe SSD I fit into the LRNV45N1 adapter need any firmware updates or maintenance down the line?
The adapter itself is a passive board with no firmware; any future maintenance would be limited to the NVMe SSD you install and its own manufacturer updates.
What is the first bottleneck I will hit if I run this adapter at full speed all day?
The data path is limited to 6.0 Gbps by the SFF-8639 U.2 link, so sustained transfers will saturate that ceiling before the PCIe 3.0 x4 host bus does.
Does the LRNV45N1 generate noticeable heat or noise when a drive is operating continuously?
The card has no active cooling or moving parts; heat output depends entirely on the installed NVMe SSD, which typically stays within its own thermal limits without extra airflow.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
