Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Small green circuit board with M.2 slot and U.2 connector linked by flat cable

Shenzhen Lianrui Information Technology

Shenzhen Lianrui Information Technology LRNV45N1 M.2 to U.2 NVMe SSD Adapter Card

SKU CH-0D6X-ME6M0 MPN LRNV45N1

Connects M.2 NVMe SSDs in 2230, 2242, 2260, 2280 and 22110mm sizes to a U.2 SFF-8639 port using an SFF-8643 cable

  • TypePCI Express Controller Card
  • Internal Ports1 M.2 M Key + 1 SFF-8639 Connector
  • StandardM.2 to U.2 NVMe SSD Adapter Card
  • Data Transfer Rate6.0 Gbps
  • Operating Systems SupportedWindows 98SE/ME/2000/XP/Vista
  • Dimensions0.32" x 0.21" x0.17"
  • Connect M.2 NVMe SSDs via U.2 port
  • Supports 2230, 2242, 2260, 2280, 22110 M-key drives
  • PCIe 3.0 Gen3 X4 option for fast data rates
  • Double-sided module assembly fits 1.5 mm height limit
  • Works with Windows 7 through 10 and Linux Kernel 3.16

M.2 to U.2 NVMe adapter card

The Linkreal LRNV45N1 connects an M.2 M-key NVMe SSD to a U.2 (SFF-8639) or SFF-8643 host port. It accepts 2230, 2242, 2260, 2280 and 22110 mm modules up to 1.5 mm component height. The board uses a PCIe 3.0 x4 link and works with PCIe 2.0 or 1.0 systems.

Builders adding NVMe storage via U.2

Suits integrators who have a free U.2 SFF-8639 or SFF-8643 connector and want to install standard M.2 NVMe drives. Not for users lacking a U.2 or SFF-8643 port, or those needing to connect B-key or B/M-key modules. OS support covers Windows 7 through 10 and Linux kernel 3.16.

M-key NVMe requirement

Only M-key NVMe SSDs function with this adapter; B-key or B/M-key drives will not work. Maximum on-board component height is 1.5 mm and double-sided modules are supported. A free U.2 SFF-8639 or SFF-8643 port is required for installation.

Najważniejsze cechy

  • Connect M.2 NVMe SSDs via U.2 port
  • Supports 2230, 2242, 2260, 2280, 22110 M-key drives
  • PCIe 3.0 Gen3 X4 option for fast data rates
  • Double-sided module assembly fits 1.5 mm height limit
  • Works with Windows 7 through 10 and Linux Kernel 3.16

Specyfikacja

BrandLinkreal
SeriesM.2 to U.2 NVMe SSD Adapter Card
Model2 Ports
TypePCI Express Controller Card
Internal Ports1 M.2 M Key + 1 SFF-8639 Connector
StandardM.2 to U.2 NVMe SSD Adapter Card
Data Transfer Rate6.0 Gbps
Operating Systems SupportedWindows 98SE/ME/2000/XP/Vista
Dimensions0.32" x 0.21" x0.17"
Weight0.20
OptionM.2 NVMe to PCI-e 3.0 Gen3 X4

Pytania dotyczące tego produktu

Will the M.2 NVMe SSD I fit into the LRNV45N1 adapter need any firmware updates or maintenance down the line?

The adapter itself is a passive board with no firmware; any future maintenance would be limited to the NVMe SSD you install and its own manufacturer updates.

What is the first bottleneck I will hit if I run this adapter at full speed all day?

The data path is limited to 6.0 Gbps by the SFF-8639 U.2 link, so sustained transfers will saturate that ceiling before the PCIe 3.0 x4 host bus does.

Does the LRNV45N1 generate noticeable heat or noise when a drive is operating continuously?

The card has no active cooling or moving parts; heat output depends entirely on the installed NVMe SSD, which typically stays within its own thermal limits without extra airflow.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.