저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

SK hynix

SK hynix 8GB DDR3 1600 CL11 Desktop RAM

SKU CH-VAQB-ST6BW

An 8 GB DDR3 desktop module running at 1600 MHz with CL11 latency for standard system upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • 8 GB capacity for smoother multitasking
  • DDR3 1600 speed moves data quickly
  • CL11 latency keeps response times low
  • 5 V operation reduces power draw
  • 240-pin DIMM fits standard desktop slots

8GB DDR3 1600 CL11 DIMM for desktop upgrades

This is an SK hynix 8GB DDR3 1600 (PC3 12800) unbuffered DIMM built for desktop computers. It runs at 1.5 V with a CAS latency of CL11 and uses a 240-pin connector. The module is organised as 2Rx8 with 512M x 8 components. It is sold new and ready for installation.

Suits owners of DDR3 systems that accept 1600 MHz

Builders whose motherboards require a different DDR generation, registered or ECC modules, or a voltage other than 1.5 V should look elsewhere. Systems limited to speeds below 1600 MHz may not run this module at its rated frequency. Buyers needing more than 8GB per slot must choose higher-capacity sticks.

240-pin DDR3 interface determines physical

The 240-pin DDR3 form factor is the single specification that decides whether this module fits the motherboard slot. A board wired for any other memory generation will not accept this DIMM. Verify the motherboard manual or existing RAM part number before purchase.

주요 특징

  • 8 GB capacity for smoother multitasking
  • DDR3 1600 speed moves data quickly
  • CL11 latency keeps response times low
  • 5 V operation reduces power draw
  • 240-pin DIMM fits standard desktop slots

사양

Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11

이 상품에 대한 질문

How much power does the 1.5 V DDR3 1600 module draw under continuous load?

The module operates at 1.5 V, the standard voltage for DDR3 1600, keeping power draw and heat low during all-day use.

What motherboard slot and chipset do I need to run this 240-pin DIMM?

You need a desktop board with a DDR3 240-pin slot; the memory controller must support 1600 MT/s and 1.5 V unbuffered operation.

Will this CL11 stick run stably alongside my existing CL9 DDR3 1600 modules?

The system will run all modules at the slowest common timing, so the CL11 stick will operate at CL9 speed if the other modules allow it.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.