저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular E1.S enterprise SSD, green circuit board with black controller and silver label

Solidigm

Solidigm SSDPFUKX019T1OZ D7-P5520 1.92TB E1.S PCIe 4.0 x4 enterprise SSD

SKU CH-03FG-5814Z MPN SSDPFUKX019T1OZ

E1.S enterprise SSD with 1.92TB capacity, PCIe 4.0 x4 interface and 3.5 PBW endurance for data-centre workloads

  • Form FactorE1.S
  • Capacity1.92TB
  • Memory Components3D NAND TLC
  • InterfacePCI-Express 4.0 x4
  • Max Sequential ReadUp to 5300 MBps
  • Max Sequential WriteUp to 1900 MBps
  • High sequential read speed up to 5300 MBps
  • High random read performance up to 706000 IOPS
  • Low write latency of 15 µs for fast response
  • High endurance rating of 3.5 PBW for long life
  • E1.S 9.5 mm form factor fits dense server chassis

Enterprise SSD for read-intensive workloads

The Solidigm D7-P5520 delivers 1.92TB of 3D NAND TLC storage in an E1.S form factor. It connects via PCIe 4.0 x4 and reaches up to 5300 MBps sequential read and 1900 MBps sequential write. Random read performance hits 706000 IOPS while random write reaches 114000 IOPS. The drive is rated for 3.5 PBW endurance and a 2000000 hour MTBF.

Verify E1.S slot and power budget

Confirm your server or storage array accepts the E1.S 9.5mm form factor before ordering. The drive draws 5W idle and 13W active, so ensure the backplane and power supply can sustain that load. Operating temperature spans 0°C to 70°C, so airflow must keep the device within this range. No other interface or connector types are supported.

E1.S hot-plug design with enterprise resilience

The 72g E1.S module is built for front-loading hot-plug bays, allowing replacement without system shutdown. It withstands 1000 G shock at 0.5 msec and 2.17 GRMS operating vibration from 5 to 700 Hz. Non-operating vibration tolerance reaches 3.13 GRMS from 5 to 800 Hz. Low latencies of 75µs read and 15µs write support consistent quality of service.

주요 특징

  • High sequential read speed up to 5300 MBps
  • High random read performance up to 706000 IOPS
  • Low write latency of 15 µs for fast response
  • High endurance rating of 3.5 PBW for long life
  • E1.S 9.5 mm form factor fits dense server chassis

사양

BrandSolidigm
SeriesD7-P5520
Part NumberAA002012B
Form FactorE1.S
Capacity1.92TB
Memory Components3D NAND TLC
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp to 5300 MBps
Max Sequential WriteUp to 1900 MBps
4KB Random ReadUp to 706,000 IOPS
4KB Random WriteUp to 114,000 IOPS
Read Latency75µs
Write Latency15µs
Endurance3.5 PBW
MTBF2,000,000 hours
Power Consumption (Idle)5W
Power Consumption (Active)13W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight72g +/- 5g
배송 무게0.20 kg
포장 크기160 × 120 × 30 mm

이 상품에 대한 질문

What comes in the single pack and does the E1.S drive need a separate tray or heatsink?

The single pack contains the E1.S drive only; trays or heatsinks are not included and must be sourced separately.

Should I pick the 1.92TB D7-P5520 or a different capacity for mixed read-write workloads?

The 1.92TB model delivers up to 5300 MBps read and 1900 MBps write with 3.5 PBW endurance, matching the series specifications for this capacity.

How does the 706000 IOPS random read figure translate when the drive is installed in a PCIe 4.0 x4 server slot?

In a PCIe 4.0 x4 slot the drive can sustain up to 706000 IOPS random read at 75µs latency, provided the platform supplies adequate power and cooling.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.