Thermaltake Tower 300 Micro-ATX Case CA-1Y4-00S1WN-00
- Mini ITX (6.7" x 6.…
- Bottom
Thermaltake
A Micro-ATX tower with three tempered-glass panels, two pre-installed 140mm fans and support for a 420mm radiator on the right side
Options Matcha Green
The Thermaltake Tower 300 in Matcha Green is a Micro-ATX tower chassis built from SPCC steel with three 3mm tempered glass panels on the front, left and right. It accepts Mini-ITX and Micro-ATX motherboards and provides three internal 3.5-inch bays plus three 2.5-inch bays for storage. Four expansion slots support graphics cards up to 400mm long when no radiator is mounted on the right side.
Two 140mm fans come pre-installed at the top so the first airflow path is ready immediately. The right-side bracket offers multiple 120mm and 140mm fan positions but the dense hole pattern can make screw alignment fiddly when fitting a thick radiator. Cable routing space behind the motherboard tray is adequate yet the bottom power-supply chamber limits very long units to 220mm. Front-panel connectors include one USB 3.2 Gen 2 Type-C, two USB 3.0 and an audio jack.
With a 420mm radiator on the right side the case moves large volumes of air directly across the motherboard, keeping coolant temperatures steady during extended sessions. The top exhaust fans pull heat away from the voltage-regulator area while the glass panels remain sealed, preventing recirculation. GPU thermals stay consistent because the 280mm clearance with a radiator still allows most mid-range cards to breathe. PSU intake draws cool air from the bottom vent independent of the main chamber.
| Brand | Thermaltake |
|---|---|
| Series | Tower 300 Series |
| Model | CA-1Y4-00SEWN-00 |
| Type | Micro-ATX Tower Chassis |
| Color | Matcha Green |
| Case Material | SPCC |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | Mini ITX (6.7" x 6.7") Micro ATX (9.6" x 9.6") |
| Side Panel | 3mm Thick Tempered Glass x 3 (Front/Left/Right) |
| Internal 3.5" Drive Bays | 3 |
| Internal 2.5" Drive Bays | 3 |
| Expansion Slots | 4 |
| Front Ports | 1 x USB 3.2 Gen 2 Type-C, 2 x USB 3.0, 1 x Audio |
| Fan Options | Top: 2 x 120mm, 1 x 120mm 2 x 140mm, 1 x 140mm Rear: 2 x 120mm, 1 x 120mm 2 x 140mm, 1 x 140mm Right Side(In front of M/B Tray): 3 x 120mm, 2 x 120mm, 1 x 120mm 3 x 140mm, 2 x 140mm, 1 x 140mm Bottom(On the power cover): 1 x 120mm 1 x 140mm |
| Pre-installed Fans | Top - 2 x 140mm |
| Radiator Options | Right Side(In front of M/B Tray): 1 x 360mm, 1 x 240mm, 1 x 120mm 1 x 420mm, 1 x 280mm, 1 x 140mm |
| Max GPU Length | 280mm(With radiator on the right side) / 400mm(Without radiator on the right side) |
| Max CPU Cooler Height | 210 mm |
| Max PSU Length | 220 mm |
| Dimensions | 21.7"x 13.5"x 11.1" |
| Weight | 18.3 lbs |
| 배송 무게 | 10.30 kg |
| 포장 크기 | 640 × 411 × 358 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The two top-mounted 140mm fans connect to your motherboard or fan hub; once the system posts, check fan RPM in BIOS or monitoring software and verify airflow through the top mesh.
The chassis includes three 3mm tempered-glass panels, two pre-installed 140mm top fans, and mounting hardware; you must buy a power supply, motherboard, CPU cooler, graphics card, storage drives and any additional fans or radiators.
CA-1Y4-00SEWN-00 is the only SKU that pairs the Matcha Green finish with the two pre-installed 140mm top fans in the Tower 300 lineup.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?