SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501587BTC
재고 있음
Tripp Lite
Tripp Lite SRW26USDP 26U Wall-Mount Rack Enclosure Cabinet
Wall-mount steel cabinet holds 26U of 19-inch rack gear up to 24.5 inches deep and swings on a hinge for rear access
- TypeWall Mount Cabinet
- Rack Units26U
- MaterialSteel
- SpecificationForm Factor:Wall Mountable
- FeaturesPackage Contents: SmartRack 26U UPS-Depth Wall-Mount Rack En
- Unit DimensionHeight:49.6" x Width:23.6" x Depth:25.5"
- Secures 26U of 19-inch rack equipment up to 24.5 in. deep
- Maximum load capacity of 250 lbs for heavy gear
- Hinged back swings away from wall for easy rear access
- Lockable vented doors and side panels protect and cool equipment
- Fully assembled with reversible doors and top/bottom cable ports
26U Wall-Mount Rack Cabinet
The Tripp Lite SRW26USDP is a 26U wall-mount rack enclosure cabinet built from heavy-duty steel with a black powder-coated finish. It secures standard 19-inch rack equipment up to 24.5 inches deep in wiring closets, classrooms, or back offices where floor space is limited. The unit arrives fully assembled and includes 48 M6 screws, 48 M6 cage nuts, 48 M6 washers, 48 12-24 screws, and two keys.
Hinged Back for Rear Access
This cabinet suits installers who need rear equipment access without floor-standing racks; the hinged back swings away from the wall for cabling and maintenance. Locking doors and side panels protect against tampering, while vented panels on the front, top, bottom, and sides promote airflow. Reversible doors open left or right by rotating the cabinet 180 degrees before mounting. It is not for sites that cannot support a 124.90 lb unit or lack the wall structure for a 250 lb load capacity.
250 lb Maximum Load Capacity
The single specification that decides fit is the 250 lb maximum load capacity, which must cover the combined weight of all mounted gear including any UPS batteries. The cabinet measures 49.6 inches high, 23.6 inches wide, and 25.5 inches deep, with numbered rack spaces and both square and threaded mounting holes for easy installation. Optional SRCASTER rolling caster kit converts it to a mobile rack if required.
주요 특징
- Secures 26U of 19-inch rack equipment up to 24.5 in. deep
- Maximum load capacity of 250 lbs for heavy gear
- Hinged back swings away from wall for easy rear access
- Lockable vented doors and side panels protect and cool equipment
- Fully assembled with reversible doors and top/bottom cable ports
사양
| Brand | Tripp Lite |
|---|---|
| Model | SRW26USDP |
| Type | Wall Mount Cabinet |
| Rack Units | 26U |
| Material | Steel |
| Specification | Form Factor:Wall Mountable |
| Features | Package Contents: SmartRack 26U UPS-Depth Wall-Mount Rack Enclosure Cabinet, Hinged Back 48 x M6 Screws 48 x M6 Cage Nuts 48 x M6 Washers 48 x 12-24 Screws 2 x Keys Owner's Manual |
| Unit Dimension | Height:49.6" x Width:23.6" x Depth:25.5" |
| Unit Weight | 124.90 lb |
| 배송 무게 | 72.58 kg |
| 포장 크기 | 1219 × 1219 × 1016 mm |
이 상품에 대한 질문
How much clear depth behind the front rails does the SRW26USDP provide for 19-inch equipment?
The cabinet secures equipment up to 24.5 inches deep, which is the usable depth behind the front mounting rails.
What is the most common mistake when mounting the hinged-back cabinet to the wall?
Installers often forget to verify that the wall structure can support the 124.90 lb unit plus up to 250 lb of equipment before hanging the cabinet on its hinge.
Which consumable hardware is included for future equipment changes, and how many of each?
The package includes 48 M6 screws, 48 M6 cage nuts, 48 M6 washers and 48 12-24 screws for adding or replacing rack-mounted devices later.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
