WRIARICH
WRIARICH SA28 USB 3.0 Type-C SATA IDE hard drive adapter
Connects 2.5in and 3.5in SATA or IDE drives plus 5.25in optical drives to USB 3.0 with included 12V power adapter
- ColorBlack
- Changer TypeUSB to IDE&SATA
- SpecificationsAll in One Solution to Connect to Different Types of Interfa
- Package ContentsAll in One Solution to Connect to Different Types of Interfa
- Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
- Power 3.5 inch drives externally with included 12V 2A adapter
- Works with Windows, Mac, Linux and Chrome without driver installation
- Also reads 5.25 inch DVD-ROM, CD-ROM and RW optical drives
- Backward compatible with USB 2.0 and 1.1 ports
All-in-One SATA IDE USB Adapter
The WRIARICH SA28 connects 2.5in and 3.5in SATA or IDE hard drives and 5.25in optical drives to a USB 3.0 Type-C port. It is built for technicians and home users who need to recover data or access legacy drives without installing them internally. The adapter works with Windows, Mac, Linux and Chrome OS. No driver installation is required.
Bundled Power and Cabling Included
A 12V 2A power adapter and a 4-pin power cable ship in the box so 3.5in drives and optical units receive adequate power outside a chassis. The single USB cable carries both data and control signals, keeping the setup compact and portable for bench work or travel.
USB 3.0 Interface Limits
The USB 3.0 connection tops out at 3.0 speeds and falls back to 2.0 or 1.1 on older ports, so maximum throughput depends on the host controller. Mechanical hard drives will saturate well below the bus ceiling, while SSDs are capped by the USB 3.0 pipeline rather than their own SATA link.
주요 특징
- Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
- Power 3.5 inch drives externally with included 12V 2A adapter
- Works with Windows, Mac, Linux and Chrome without driver installation
- Also reads 5.25 inch DVD-ROM, CD-ROM and RW optical drives
- Backward compatible with USB 2.0 and 1.1 ports
사양
| Brand | WRIARICH |
|---|---|
| Model | SA28 |
| Color | Black |
| Changer Type | USB to IDE&SATA |
| Specifications | All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc. Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0). Support |
| Package Contents | All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. No Drive Needed for Windows, Mac and Linux, Chrome the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and tro |
이 상품에 대한 질문
Will the included 12V 2A power adapter need replacing if it fails?
The external 12V 2A power adapter is included; if it fails you can replace it with any 12V 2A unit that has the same barrel plug.
Does the USB 3.0 interface or the SATA drive become the bottleneck during long transfers?
The adapter is limited by the USB 3.0 link, so sustained speeds will not exceed that interface.
Does the adapter get hot or draw extra power when running a 3.5-inch drive all day?
The 12V 2A power adapter supplies the drive directly, so the adapter itself stays cool and draws only minimal power from the USB port.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001049BTC
재고 있음