저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Compact silver SFX unit with dual rear fans and hot-swap handle

ZIPPY

ZIPPY R2W-6500P-R 500W SFX power supply

SKU CH-94VW-4PCW8 MPN R2W-6500P-R

500 W SFX redundant supply with hot-swap modules, active PFC, dual 38 mm fans and 48-pin industrial connectors

  • TypeSFX
  • 500 W maximum output supports demanding server loads
  • SFX form factor fits compact chassis designs
  • Hot-swappable redundancy keeps systems running during module replacement
  • Dual EMI filters meet FCC Class B and CISPR22 limits
  • Active PFC with full-range 115-240 V input ensures stable power worldwide

SFX 500 W redundant server supply

The ZIPPY R2W-6500P-R is a hot-swappable SFX power supply rated at 500 W. It accepts 115-240 V AC input at 47-63 Hz and delivers a 12 V rail up to 32 A. Active PFC meets IEC-1000-3-2 Class D requirements. Two 38x38x28 mm DC fans cool each module. Dimensions are 300.00 x 101.00 x 84.00 mm.

Suits redundant server builds.

This unit targets server chassis that support hot-pluggable redundant power modules using 48-pin industrial connectors. Builders working with standard ATX or SFX single-supply cases cannot use the redundant form factor or the specialised connector. Operators needing silent office operation should note the dual-fan cooling design. The operating temperature range is 0 °C to 40 °C.

Redundancy and EMI filtering included

Hot-swappable redundancy lets a failed module be replaced without shutting down the system. Dual EMI inlet filters comply with FCC Class B and CISPR22 Class B limits. Safety certifications cover UL 1950, CSA 22.2 No. 950 and TUV IEC 950. Optional Serial ATA connectors can be added for drive power. Humidity tolerance spans 20-95 % operating and 10-95 % non-operating.

주요 특징

  • 500 W maximum output supports demanding server loads
  • SFX form factor fits compact chassis designs
  • Hot-swappable redundancy keeps systems running during module replacement
  • Dual EMI filters meet FCC Class B and CISPR22 limits
  • Active PFC with full-range 115-240 V input ensures stable power worldwide

사양

TypeSFX

이 상품에 대한 질문

What existing server chassis and 48-pin backplane do I need to install this R2W-6500P-R module?

This SFX redundant supply requires a compatible server chassis with a matching 48-pin industrial connector backplane; it hot-plugs directly into that slot without cables.

Will my older components that draw from the 12 V rail stay within the 32 A limit of this unit?

The single 12 V rail delivers up to 32 A, so legacy drives and cards must not exceed that combined current; Active PFC and dual EMI filters maintain clean power for mixed-age hardware.

How can I confirm the R2W-6500P-R is operating correctly after installation?

Verify the two 38 mm DC fans spin, the module seats firmly in the 48-pin slot, and the server POST completes; normal operation stays within the 0–40 °C range.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.