Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board 288-pin DIMM with black memory chips and silver label

A-Tech

A-Tech 64GB DDR4 2933 ECC LRDIMM 4Rx4 CL21 1.20V for Hynix HMAA8GL7CPR4N-WM Server RAM

SKU CH-9TVY-EYZRF

A 64 GB DDR4 2933 ECC LRDIMM module with CL21 latency and 1.20 V operation

  • Capacity64GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64 GB capacity enables larger datasets in memory
  • DDR4 2933 speed delivers 23400 MT/s data rate
  • ECC LRDIMM with 4Rx4 rank detects and corrects errors
  • 20 V operation matches standard DDR4 voltage
  • 288-pin DIMM form factor fits compatible server slots

Capacity and form factor

This 64 GB DDR4 LRDIMM module uses the 288-pin DIMM form factor and is built for server and workstation platforms that require registered, load-reduced memory. It delivers a single-module capacity of 64 GB to increase total system memory without occupying additional slots.

Upgrade path and fit

The module replaces the Hynix HMAA8GL7CPR4N-WM part and matches its DDR4 2933 (PC4-23400) speed, CL21 latency, 1.20 V voltage and 4Rx4 rank organisation. The jump is worthwhile when the motherboard and processor support load-reduced ECC DIMMs at this frequency and rank configuration.

Installation notes

Install by aligning the 288-pin edge connector with the DIMM slot and pressing until the retention clips engage; the load-reduced design reduces electrical load on the memory controller. Common issues include mixing LRDIMMs with standard RDIMMs or UDIMMs, populating unsupported rank counts per channel, or using a platform that does not enable ECC functionality.

Pluspunten

  • 64 GB capacity enables larger datasets in memory
  • DDR4 2933 speed delivers 23400 MT/s data rate
  • ECC LRDIMM with 4Rx4 rank detects and corrects errors
  • 20 V operation matches standard DDR4 voltage
  • 288-pin DIMM form factor fits compatible server slots

Specificaties

BrandA-Tech
Capacity64GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

Will this 288-pin DDR4 LRDIMM fit my server's memory slots?

Yes, the module uses the standard 288-pin DDR4 DIMM form factor and 1.20V voltage, so it fits any server slot designed for DDR4 LRDIMMs.

Do I need to configure anything in the BIOS after installing this 4Rx4 ECC module?

Most servers detect the 64GB 4Rx4 LRDIMM at 2933MHz automatically; the common mistake is mixing LRDIMMs with standard RDIMMs in the same channel, which prevents boot.

When should I expect to replace this 64GB DDR4 2933 module?

The module has no moving parts and runs at standard 1.20V; replacement is only needed if a memory test reports uncorrectable ECC errors or the server's maximum capacity is reached.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.