SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.0049743BTC
재고 있음
A-Tech
A-Tech 64GB DDR4 2933 ECC LRDIMM 4Rx4 CL21 1.20V for Hynix HMAA8GL7CPR4N-WM Server RAM
A 64 GB DDR4 2933 ECC LRDIMM module with CL21 latency and 1.20 V operation
- Capacity64GB
- SpeedDDR4 2933 (PC4 23400)
- CAS LatencyCL21
- Voltage1.20V
- ECCYes
- Buffered/RegisteredLoad Reduced
- 64 GB capacity enables larger datasets in memory
- DDR4 2933 speed delivers 23400 MT/s data rate
- ECC LRDIMM with 4Rx4 rank detects and corrects errors
- 20 V operation matches standard DDR4 voltage
- 288-pin DIMM form factor fits compatible server slots
Capacity and form factor
This 64 GB DDR4 LRDIMM module uses the 288-pin DIMM form factor and is built for server and workstation platforms that require registered, load-reduced memory. It delivers a single-module capacity of 64 GB to increase total system memory without occupying additional slots.
Upgrade path and fit
The module replaces the Hynix HMAA8GL7CPR4N-WM part and matches its DDR4 2933 (PC4-23400) speed, CL21 latency, 1.20 V voltage and 4Rx4 rank organisation. The jump is worthwhile when the motherboard and processor support load-reduced ECC DIMMs at this frequency and rank configuration.
Installation notes
Install by aligning the 288-pin edge connector with the DIMM slot and pressing until the retention clips engage; the load-reduced design reduces electrical load on the memory controller. Common issues include mixing LRDIMMs with standard RDIMMs or UDIMMs, populating unsupported rank counts per channel, or using a platform that does not enable ECC functionality.
주요 특징
- 64 GB capacity enables larger datasets in memory
- DDR4 2933 speed delivers 23400 MT/s data rate
- ECC LRDIMM with 4Rx4 rank detects and corrects errors
- 20 V operation matches standard DDR4 voltage
- 288-pin DIMM form factor fits compatible server slots
사양
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
이 상품에 대한 질문
Will this 288-pin DDR4 LRDIMM fit my server's memory slots?
Yes, the module uses the standard 288-pin DDR4 DIMM form factor and 1.20V voltage, so it fits any server slot designed for DDR4 LRDIMMs.
Do I need to configure anything in the BIOS after installing this 4Rx4 ECC module?
Most servers detect the 64GB 4Rx4 LRDIMM at 2933MHz automatically; the common mistake is mixing LRDIMMs with standard RDIMMs in the same channel, which prevents boot.
When should I expect to replace this 64GB DDR4 2933 module?
The module has no moving parts and runs at standard 1.20V; replacement is only needed if a memory test reports uncorrectable ECC errors or the server's maximum capacity is reached.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
