我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board 288-pin DIMM with black memory chips and silver label

A-Tech

A-Tech 64GB DDR4 2933 ECC LRDIMM 4Rx4 CL21 1.20V for Hynix HMAA8GL7CPR4N-WM Server RAM

SKU CH-9TVY-EYZRF

A 64 GB DDR4 2933 ECC LRDIMM module with CL21 latency and 1.20 V operation

  • Capacity64GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64 GB capacity enables larger datasets in memory
  • DDR4 2933 speed delivers 23400 MT/s data rate
  • ECC LRDIMM with 4Rx4 rank detects and corrects errors
  • 20 V operation matches standard DDR4 voltage
  • 288-pin DIMM form factor fits compatible server slots

Capacity and form factor

This 64 GB DDR4 LRDIMM module uses the 288-pin DIMM form factor and is built for server and workstation platforms that require registered, load-reduced memory. It delivers a single-module capacity of 64 GB to increase total system memory without occupying additional slots.

Upgrade path and fit

The module replaces the Hynix HMAA8GL7CPR4N-WM part and matches its DDR4 2933 (PC4-23400) speed, CL21 latency, 1.20 V voltage and 4Rx4 rank organisation. The jump is worthwhile when the motherboard and processor support load-reduced ECC DIMMs at this frequency and rank configuration.

Installation notes

Install by aligning the 288-pin edge connector with the DIMM slot and pressing until the retention clips engage; the load-reduced design reduces electrical load on the memory controller. Common issues include mixing LRDIMMs with standard RDIMMs or UDIMMs, populating unsupported rank counts per channel, or using a platform that does not enable ECC functionality.

商品特色

  • 64 GB capacity enables larger datasets in memory
  • DDR4 2933 speed delivers 23400 MT/s data rate
  • ECC LRDIMM with 4Rx4 rank detects and corrects errors
  • 20 V operation matches standard DDR4 voltage
  • 288-pin DIMM form factor fits compatible server slots

商品規格

BrandA-Tech
Capacity64GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

商品問答

Will this 288-pin DDR4 LRDIMM fit my server's memory slots?

Yes, the module uses the standard 288-pin DDR4 DIMM form factor and 1.20V voltage, so it fits any server slot designed for DDR4 LRDIMMs.

Do I need to configure anything in the BIOS after installing this 4Rx4 ECC module?

Most servers detect the 64GB 4Rx4 LRDIMM at 2933MHz automatically; the common mistake is mixing LRDIMMs with standard RDIMMs in the same channel, which prevents boot.

When should I expect to replace this 64GB DDR4 2933 module?

The module has no moving parts and runs at standard 1.20V; replacement is only needed if a memory test reports uncorrectable ECC errors or the server's maximum capacity is reached.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。