Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 3.5 inch SAS hard drive bare mechanism with circuit board visible

DELL

DELL 400-ANTU 10TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-FVG7-YPVEQ

A 10 TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive for desktop storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 10TB capacity stores large datasets and backups
  • SAS 12Gb/s interface delivers fast data transfer rates
  • 7200 RPM spindle speed provides responsive performance
  • 5 inch form factor fits standard desktop drive bays
  • Non hot-swap tray design suits fixed internal installations

Dell 400-ANTU 10TB SAS drive

This is a new Dell 400-ANTU internal hard drive with a 10TB capacity. It uses a 3.5 inch form factor and a SAS 12Gb/s interface spinning at 7200 RPM. The drive is supplied as a bare unit in non hot-swap configuration.

Suitable for SAS storage arrays and servers

The 12Gb/s SAS interface suits storage arrays and servers built for this protocol. It is not for systems that lack a SAS backplane or controller, nor for hot-swap bays that require a drive tray. Builders needing a smaller form factor should look at something else.

SAS 12Gb/s interface decides fit

The single specification that decides fit is the SAS 12Gb/s interface. Your host bus adapter or backplane must support this exact connection. Without a compatible SAS controller the drive will not function.

Pluspunten

  • 10TB capacity stores large datasets and backups
  • SAS 12Gb/s interface delivers fast data transfer rates
  • 7200 RPM spindle speed provides responsive performance
  • 5 inch form factor fits standard desktop drive bays
  • Non hot-swap tray design suits fixed internal installations

Specificaties

BrandDell
Model400-ANTU
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity10TB
RPM7200 RPM
Form Factor3.5"

Vragen over dit artikel

Will the 3.5" form factor fit a standard desktop drive bay?

Yes, the 3.5" form factor matches standard desktop drive bays and uses the common SAS connector layout.

What is the correct way to install a non hot-swap SAS drive?

Power down the system completely, connect both the SAS data and power cables, then secure the drive with screws before restarting.

How often should I check the 7200 RPM drive for mechanical wear?

Monitor SMART attributes monthly; plan replacement if reallocated sectors or seek errors begin to rise.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.