暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive bare mechanism with circuit board visible

DELL

DELL 400-ANTU 10TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-FVG7-YPVEQ

A 10 TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive for desktop storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 10TB capacity stores large datasets and backups
  • SAS 12Gb/s interface delivers fast data transfer rates
  • 7200 RPM spindle speed provides responsive performance
  • 5 inch form factor fits standard desktop drive bays
  • Non hot-swap tray design suits fixed internal installations

Dell 400-ANTU 10TB SAS drive

This is a new Dell 400-ANTU internal hard drive with a 10TB capacity. It uses a 3.5 inch form factor and a SAS 12Gb/s interface spinning at 7200 RPM. The drive is supplied as a bare unit in non hot-swap configuration.

Suitable for SAS storage arrays and servers

The 12Gb/s SAS interface suits storage arrays and servers built for this protocol. It is not for systems that lack a SAS backplane or controller, nor for hot-swap bays that require a drive tray. Builders needing a smaller form factor should look at something else.

SAS 12Gb/s interface decides fit

The single specification that decides fit is the SAS 12Gb/s interface. Your host bus adapter or backplane must support this exact connection. Without a compatible SAS controller the drive will not function.

特長

  • 10TB capacity stores large datasets and backups
  • SAS 12Gb/s interface delivers fast data transfer rates
  • 7200 RPM spindle speed provides responsive performance
  • 5 inch form factor fits standard desktop drive bays
  • Non hot-swap tray design suits fixed internal installations

仕様

BrandDell
Model400-ANTU
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity10TB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

Will the 3.5" form factor fit a standard desktop drive bay?

Yes, the 3.5" form factor matches standard desktop drive bays and uses the common SAS connector layout.

What is the correct way to install a non hot-swap SAS drive?

Power down the system completely, connect both the SAS data and power cables, then secure the drive with screws before restarting.

How often should I check the 7200 RPM drive for mechanical wear?

Monitor SMART attributes monthly; plan replacement if reallocated sectors or seek errors begin to rise.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。