Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
IHDAPP USB 3.0 to SATA adapter cable, 22-pin connector, 40 cm length

IHDAPP

IHDAPP USB 3.0 to SATA Adapter Cable 22 pin 40 cm

SKU CH-1BFX-EZN35

Connect 2.5" or 3.5" SATA drives to a USB 3.0 port for up to 5 Gbps transfer with UASP support

  • Changer TypeUSB to SATA
  • Connector A1 x USB 3.0
  • Connector B1 x SATA III

Model USB 3.0

  • USB 3.0
  • Standard

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Add storage with 2.5" or 3.5" SATA drives
  • 5 Gbps USB 3.0 speed, up to 70% faster with UASP
  • Portable 40 cm cable needs no external power
  • Swap drives instantly without an enclosure
  • Supports SATA drives up to 12TB

Connect 2.5" and 3.5" drives

This USB 3.0 to SATA adapter cable lets laptop and desktop users access any 2.5" or 3.5" SATA SSD or HDD up to 12TB without installing it inside an enclosure. The 22-pin connector handles both drive sizes, making it useful for data migration, drive cloning, backups and recovery tasks. No external power adapter is included, so 3.5" drives need their own supply.

Up to 5 Gbps with UASP

The adapter supports USB 3.0 transfer rates of 5 Gbps and works with UASP for up to 70% faster throughput than standard USB 3.0 when the host also supports it. It is practical for moving large media libraries or creating disk images, but the single SATA III link and cable length limit sustained performance on very fast SSDs.

Portable 40 cm cable

A 40 cm cable keeps the setup compact enough for a laptop bag while still giving enough reach for a desktop port. The plug-and-play design means you can swap drives quickly without tools or driver installs. Remember that 3.5" drives require separate power, so the adapter alone is only a complete mobile solution for 2.5" SSDs and hard drives.

Pluspunten

  • Add storage with 2.5" or 3.5" SATA drives
  • 5 Gbps USB 3.0 speed, up to 70% faster with UASP
  • Portable 40 cm cable needs no external power
  • Swap drives instantly without an enclosure
  • Supports SATA drives up to 12TB

Specificaties

Changer TypeUSB to SATA
Connector A1 x USB 3.0
Connector B1 x SATA III

Vragen over dit artikel

Will this 22-pin SATA adapter power my existing 3.5" desktop drive without a separate supply?

No, the cable draws power from the USB 3.0 port only, which is enough for 2.5" drives but not for 3.5" units; a 12 V power adapter (not included) is required for 3.5" HDDs.

How can I verify the link is running at the full 5 Gbps with UASP enabled?

In Windows Device Manager check that the device appears under "Universal Serial Bus controllers" as a UASP-compliant USB Attached SCSI (UAS) device; benchmark tools should then show sustained reads well above 300 MB/s on a capable SSD.

Does the 40 cm cable include a 12 V power brick for 3.5" drives or must I buy one?

The package contains only the USB 3.0 to 22-pin SATA converter; a 12 V external power adapter for 3.5" drives is not included and must be purchased separately.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.