Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
IHDAPP USB 3.0 to SATA adapter cable, 22-pin connector, 40 cm length

IHDAPP

IHDAPP USB 3.0 to SATA Adapter Cable 22 pin 40 cm

SKU CH-1BFX-EZN35

Connect 2.5" or 3.5" SATA drives to a USB 3.0 port for up to 5 Gbps transfer with UASP support

  • Changer TypeUSB to SATA
  • Connector A1 x USB 3.0
  • Connector B1 x SATA III

Model USB 3.0

  • USB 3.0
  • Standard

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Add storage with 2.5" or 3.5" SATA drives
  • 5 Gbps USB 3.0 speed, up to 70% faster with UASP
  • Portable 40 cm cable needs no external power
  • Swap drives instantly without an enclosure
  • Supports SATA drives up to 12TB

Connect 2.5" and 3.5" drives

This USB 3.0 to SATA adapter cable lets laptop and desktop users access any 2.5" or 3.5" SATA SSD or HDD up to 12TB without installing it inside an enclosure. The 22-pin connector handles both drive sizes, making it useful for data migration, drive cloning, backups and recovery tasks. No external power adapter is included, so 3.5" drives need their own supply.

Up to 5 Gbps with UASP

The adapter supports USB 3.0 transfer rates of 5 Gbps and works with UASP for up to 70% faster throughput than standard USB 3.0 when the host also supports it. It is practical for moving large media libraries or creating disk images, but the single SATA III link and cable length limit sustained performance on very fast SSDs.

Portable 40 cm cable

A 40 cm cable keeps the setup compact enough for a laptop bag while still giving enough reach for a desktop port. The plug-and-play design means you can swap drives quickly without tools or driver installs. Remember that 3.5" drives require separate power, so the adapter alone is only a complete mobile solution for 2.5" SSDs and hard drives.

Přednosti

  • Add storage with 2.5" or 3.5" SATA drives
  • 5 Gbps USB 3.0 speed, up to 70% faster with UASP
  • Portable 40 cm cable needs no external power
  • Swap drives instantly without an enclosure
  • Supports SATA drives up to 12TB

Specifikace

Changer TypeUSB to SATA
Connector A1 x USB 3.0
Connector B1 x SATA III

Otázky k tomuto produktu

Will this 22-pin SATA adapter power my existing 3.5" desktop drive without a separate supply?

No, the cable draws power from the USB 3.0 port only, which is enough for 2.5" drives but not for 3.5" units; a 12 V power adapter (not included) is required for 3.5" HDDs.

How can I verify the link is running at the full 5 Gbps with UASP enabled?

In Windows Device Manager check that the device appears under "Universal Serial Bus controllers" as a UASP-compliant USB Attached SCSI (UAS) device; benchmark tools should then show sustained reads well above 300 MB/s on a capable SSD.

Does the 40 cm cable include a 12 V power brick for 3.5" drives or must I buy one?

The package contains only the USB 3.0 to 22-pin SATA converter; a 12 V external power adapter for 3.5" drives is not included and must be purchased separately.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.