Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with silver components and solder terminals, 73 by 51 mm

myVolts

myVolts DC-DC 600W 10-60V to 12-80V Boost Converter Power Supply

SKU CH-BZ1H-RRF3G

Boosts 12-60V input to 12-80V adjustable output at up to 600W with 95% efficiency

  • TypeAT
  • Delivers up to 600W output with 10A maximum current
  • Accepts 12V to 60V input for flexible source compatibility
  • Adjusts output from 12V to 80V to match load requirements
  • Achieves up to 95% conversion efficiency for minimal loss
  • Compact 73mm by 51mm footprint suits tight installations

High-Power DC-DC Boost Converter Module

This 600W step-up module accepts a wide 12V to 60V input range and delivers a continuously adjustable 12V to 80V output. It is built for engineers and system integrators who need to raise DC voltage levels in custom power architectures, industrial equipment or test rigs. The unit supports a maximum output current of 10A and includes an onboard fuse for short-circuit protection.

Efficiency and Thermal Performance

Conversion efficiency reaches up to 95 percent, varying with the actual input voltage and current levels. Maximum output power scales linearly with the input voltage: 120W at 12V in, 240W at 24V in and the full 600W at 60V in, all limited by the 10A output ceiling. The compact 73 by 51mm footprint allows integration into tight enclosures where airflow may be limited.

Upgrade Path and Fit

This module replaces lower-wattage boost converters that cannot sustain 10A across a broad voltage span. The jump is worthwhile when a project demands adjustable high-voltage output up to 80V from a variable low-voltage source. It is not suited for applications requiring isolated outputs, fixed regulated rails without adjustment, or input voltages below 12V.

Pluspunten

  • Delivers up to 600W output with 10A maximum current
  • Accepts 12V to 60V input for flexible source compatibility
  • Adjusts output from 12V to 80V to match load requirements
  • Achieves up to 95% conversion efficiency for minimal loss
  • Compact 73mm by 51mm footprint suits tight installations

Specificaties

TypeAT

Vragen over dit artikel

How do I mount the 73 by 51 mm boost module and set the 12 to 80 V output without damaging the fuse?

Secure the board using its 73 by 51 mm mounting holes, connect a 12 to 60 V source that can supply up to 15 A, then adjust the output voltage potentiometer before applying a load; the onboard fuse protects against short circuits.

Which component will need replacement first if the converter runs near its 10 A output limit for long periods?

The input fuse is the primary sacrificial part; sustained 10 A operation at low input voltage pushes the 15 A input limit and can blow the fuse, so keep a spare fuse of the same rating.

At what input voltage does the 600 W rating become achievable instead of the lower 120 W or 240 W figures?

Full 600 W output requires a 60 V input delivering 10 A; at 24 V input the maximum is 240 W, and at 12 V input it drops to 120 W because the 10 A output current limit remains constant.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.