Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green rectangular circuit board with silver components and solder terminals, 73 by 51 mm

myVolts

myVolts DC-DC 600W 10-60V to 12-80V Boost Converter Power Supply

SKU CH-BZ1H-RRF3G

Boosts 12-60V input to 12-80V adjustable output at up to 600W with 95% efficiency

  • TypeAT
  • Delivers up to 600W output with 10A maximum current
  • Accepts 12V to 60V input for flexible source compatibility
  • Adjusts output from 12V to 80V to match load requirements
  • Achieves up to 95% conversion efficiency for minimal loss
  • Compact 73mm by 51mm footprint suits tight installations

High-Power DC-DC Boost Converter Module

This 600W step-up module accepts a wide 12V to 60V input range and delivers a continuously adjustable 12V to 80V output. It is built for engineers and system integrators who need to raise DC voltage levels in custom power architectures, industrial equipment or test rigs. The unit supports a maximum output current of 10A and includes an onboard fuse for short-circuit protection.

Efficiency and Thermal Performance

Conversion efficiency reaches up to 95 percent, varying with the actual input voltage and current levels. Maximum output power scales linearly with the input voltage: 120W at 12V in, 240W at 24V in and the full 600W at 60V in, all limited by the 10A output ceiling. The compact 73 by 51mm footprint allows integration into tight enclosures where airflow may be limited.

Upgrade Path and Fit

This module replaces lower-wattage boost converters that cannot sustain 10A across a broad voltage span. The jump is worthwhile when a project demands adjustable high-voltage output up to 80V from a variable low-voltage source. It is not suited for applications requiring isolated outputs, fixed regulated rails without adjustment, or input voltages below 12V.

Najważniejsze cechy

  • Delivers up to 600W output with 10A maximum current
  • Accepts 12V to 60V input for flexible source compatibility
  • Adjusts output from 12V to 80V to match load requirements
  • Achieves up to 95% conversion efficiency for minimal loss
  • Compact 73mm by 51mm footprint suits tight installations

Specyfikacja

TypeAT

Pytania dotyczące tego produktu

How do I mount the 73 by 51 mm boost module and set the 12 to 80 V output without damaging the fuse?

Secure the board using its 73 by 51 mm mounting holes, connect a 12 to 60 V source that can supply up to 15 A, then adjust the output voltage potentiometer before applying a load; the onboard fuse protects against short circuits.

Which component will need replacement first if the converter runs near its 10 A output limit for long periods?

The input fuse is the primary sacrificial part; sustained 10 A operation at low input voltage pushes the 15 A input limit and can blow the fuse, so keep a spare fuse of the same rating.

At what input voltage does the 600 W rating become achievable instead of the lower 120 W or 240 W figures?

Full 600 W output requires a 60 V input delivering 10 A; at 24 V input the maximum is 240 W, and at 12 V input it drops to 120 W because the 10 A output current limit remains constant.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.