NEMIX RAM 32GB (2×16GB) DDR5 5600 CL46 1.1V UDIMM Supermicro X14SAE
- 32GB (2 x 16GB)
- 288-Pin DDR5 UDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
NEMIX RAM
A 32 GB DDR5 5600 MHz UDIMM with CL46 latency, 1.1 V operation and 2Rx8 rank, built from major OEM chips and validated for the Supermicro X14SAE motherboard
Size 32GB
This 32GB DDR5 module is built to the precise rank, voltage and timing the X14SAE memory controller expects. It installs as a 288-pin UDIMM and is recognised at full capacity without manual configuration.
Operating at 1.10V, the module draws minimal power and produces no audible noise. Without a heat spreader it relies on case airflow, so normal chassis ventilation keeps temperatures within specification during typical workloads.
The single 32GB DIMM upgrades one slot to the board's rated 5600MHz speed and CL46 latency. It does not add ECC, registered buffering or RGB lighting, and it leaves remaining slots free for further expansion within the motherboard's population rules.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Align the notch on the 288-pin DDR5 UDIMM with the slot key, press down until both side clips click, then verify in BIOS that the module is recognised at 5600 MHz and 1.10 V; the step often missed is checking the motherboard manual for the correct DIMM population order before fitting the 32 GB stick.
No scheduled maintenance is required for the non-ECC unbuffered UDIMM; if a memory error appears, run a memtest and replace the module under the lifetime replacement warranty.
The CAS latency of CL46 at 1.10 V sets the timing ceiling; sustained workloads will hit this latency boundary before any thermal throttle because the module has no heat spreader.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?