We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz PC5-44800 2Rx8 CL46 1.1V 288-Pin UDIMM Supermicro X14SAE memory upgrade

SKU CH-X531-ME07Z

A 32 GB DDR5 5600 MHz UDIMM with CL46 latency, 1.1 V operation and 2Rx8 rank, built from major OEM chips and validated for the Supermicro X14SAE motherboard

  • Capacity32GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB

  • Exact-match upgrade for Supermicro X14SAE
  • 32 GB DDR5 5600 MHz runs at rated speed
  • 2Rx8 CL46 1.1 V unbuffered UDIMM
  • Major OEM chips tested for stability
  • 288-pin form factor fits desktop board

Exact-match upgrade for Supermicro X14SAE

This 32GB DDR5 module is built to the precise rank, voltage and timing the X14SAE memory controller expects. It installs as a 288-pin UDIMM and is recognised at full capacity without manual configuration.

Thermals, noise and power draw

Operating at 1.10V, the module draws minimal power and produces no audible noise. Without a heat spreader it relies on case airflow, so normal chassis ventilation keeps temperatures within specification during typical workloads.

What the bundled kit changes

The single 32GB DIMM upgrades one slot to the board's rated 5600MHz speed and CL46 latency. It does not add ECC, registered buffering or RGB lighting, and it leaves remaining slots free for further expansion within the motherboard's population rules.

Highlights

  • Exact-match upgrade for Supermicro X14SAE
  • 32 GB DDR5 5600 MHz runs at rated speed
  • 2Rx8 CL46 1.1 V unbuffered UDIMM
  • Major OEM chips tested for stability
  • 288-pin form factor fits desktop board

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K1
Capacity32GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 288-pin UDIMM into the Supermicro X14SAE, and which step is often missed?

Align the notch on the 288-pin DDR5 UDIMM with the slot key, press down until both side clips click, then verify in BIOS that the module is recognised at 5600 MHz and 1.10 V; the step often missed is checking the motherboard manual for the correct DIMM population order before fitting the 32 GB stick.

What maintenance or replacement will this 32 GB DDR5 module need over time?

No scheduled maintenance is required for the non-ECC unbuffered UDIMM; if a memory error appears, run a memtest and replace the module under the lifetime replacement warranty.

What limit appears first when the 2Rx8 CL46 kit runs at 5600 MHz under sustained load?

The CAS latency of CL46 at 1.10 V sets the timing ceiling; sustained workloads will hit this latency boundary before any thermal throttle because the module has no heat spreader.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.