NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 1.1V 288-pin UDIMM Supermicro X14SAZ-TLN4F memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR5 UDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
NEMIX RAM
32 GB DDR5 5600 CL46 UDIMM kit verified for Supermicro X14SAE-F motherboard
Size 32GB
This 32 GB DDR5-5600 UDIMM delivers the precise 2Rx8 rank, 1.1 V voltage and CL46 timing the motherboard expects. Non-ECC unbuffered design matches the board's 288-pin slots so the system recognises full capacity at rated speed without manual tuning.
Operating at 1.10 V means the modules run cool and draw minimal power during typical desktop workloads. No heat spreader is fitted, relying on case airflow, and the low voltage helps keep acoustic levels unchanged in a quiet build.
The jump is worthwhile when your current memory runs below 5600 MT/s or totals less than 32 GB and the board's population rules allow this 2Rx8 configuration. Buyers needing ECC, registered DIMMs or higher frequencies should look elsewhere.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Align the notch on the module with the slot key, press firmly until both retention clips click, then check the motherboard manual for the correct DIMM population order so the 32 GB kit is recognised at 5600 MT/s.
No routine maintenance is required; the module has no heat spreader and runs at standard JEDEC voltage, so replacement is only necessary if a memory test reports errors or you increase total system capacity beyond the board's supported limit.
The CAS latency of 46 cycles at 5600 MT/s sets the baseline response time; under continuous heavy workloads the memory controller's thermal throttling or the board's maximum supported rank count will limit performance before the modules themselves do.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?